View 77HDA26S_38497.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com www..com
Amphenol
17TS
17SD
17RR
17FCC
17HD
COMMERCIAL SERIES
Stamped and formed contacts
COMMERCIAL SERIES
Stamped and formed contacts
COMMERCIAL SERIES
Stamped and formed contacts
17SD STRAIGHT
PCB STRAIGHT MOUNTING SOLDER CUP
17FCC FILTERED
R/A AND STRAIGHT STYLES FOR PCB MOUNTING SOLDER CUP
17RR
CRIMP CONTACTS
Basic series for standard level applications. 100 to 200 mating cycles. (Option: 500 mating cycles). PCB mounting (brackets - boardlocks) and panel mounting (threaded inserts - female screws) hardware available.
New low cost filtered series with wide range of capacitance from 180 to 47000 PF. Compatible with standard D Sub connectors layout. PCB mounting (brackets - boardlocks) and panel mounting (threaded inserts - female screws) hardware available.
Crimp and rear release contacts with housings for cable applications. Depending on the application contacts can be supplied bulk packaged or reel packaged. Contacts duplex plating (gold/tin) or 100% gold plated. From 10" to 50" gold plating. Panel mounting options available.
17TS RIGHT ANGLE
R/A PCB MOUNTING
17HD
RIGHT ANGLE AND STRAIGHT PCB MOUNTING SOLDER CUP
Low cost series with brackets, grounding tabs, 4-40 threaded inserts or female jackscrews and boardlocks. 100 to 200 mating cycles. MIL and HE5 layouts.
1,6 high density series: - 15 contacts in a 9 way shell - 26 ... 15 - 44 ... 25 - 62 ... 37 - 78 ... 50 PCB mounting (brackets - boardlocks) and panel mounting (threaded inserts - female screws) hardware available for R/A styles.
www..com www..com
Amphenol
17DM/17DMM
17DF 17DF E 17D
TELECOM AND INDUSTRIAL SERIES
Screw machined contacts
TELECOM AND INDUSTRIAL SERIES
Screw machined contacts
MILITARY SERIES
Screw machined contacts
17D
R/A AND STRAIGHT STYLES FOR PCB MOUNTING SOLDER CUP W.WRAPP. TERMINATIONS
17DF E
STRAIGHT COMPLIANT PINS WITH PRE-INSERTION BOARDLOCKS EMC JOINTAGE
17DM/17DMM
R/A AND STRAIGHT STYLES FOR PCB MOUNTING SOLDER CUP W.WRAPP. TERMINATIONS
Basic series for applications which require standard performances and screw machined contacts reliability NFC 93425 - UL rated. MIL and HE5 layouts.
17DF
R/A AND STRAIGHT STYLES FOR PCB MOUNTING SOLDER CUP W.WRAPP. TERMINATIONS
Same series than 17DF with compliant pins and pre-insertion boardlocks. EMC jointage as an option for a perfect shielding-sealing between the metal cover of the equipment and the front shell of connector. Permits a excellent EMC shielding to comply with new 1996 EMC regulations. The pre-insertion boardlocks insure safe and reliable connector position onto the PCB during the assembly/insertion process. Flat rock tooling.
HE508 and MIL series for military applications. NFC 93425 - UL rated GAM T 1 A. MIL C 24308 QPL Green thermoset (DAP). HE5 and MIL layout.
17D series upgraded for Telecom applications which require high number of mating cycles and high operating temperature contacts. Bronze contacts. Lnz list. GAM T 1 A. MIL and HE5 layouts.
www..com www..com
Amphenol
17SMT
17TW 17HT H 17HT N
New technologies
HIGH TEMPERATURE SERIES
SMT COMPATIBLE
New technologies
HIGH TEMPERATURE SERIES
SMT COMPATIBLE
New technologies
SMT SERIES
17HT N
RIGHT ANGLE PCB MOUNTING
17TW HYBRID
R/A AND STRAIGHT PCB MOUNTING CRIMP SOLDER CUP
17SMT
RIGHT ANGLE PCB MOUNTING
New series of R/A PCB connectors compatible with new soldering techniques used for SMT process. MIL layout. Can also be used with wave soldering process.
New series of hybrid commercial connectors multiapplications. Permits a mix of:
- Signal, - Power, - Shielded and coaxial, - Fiber optic, - High voltage, contacts. PCB styles come equiped with mounting hardware and contacts. MIL and HE5 layouts. Compatible with SMT soldering techniques. Can also be used with wave soldering process.
17HT H 1.6 HIGH DENSITY
RIGHT ANGLE PCB MOUNTING
New series of SMT connectors with Zero Insertion Force boardlocks. Female contacts only. Generation I to be handplaced or to be picked and placed by special robotic equipment. Generation II compatible with most standard low speed SMD placement machines.
New series of R/A PCB connectors compatible with new soldering techniques used for SMT process. Female contacts only. MIL layout. Can also be used with wave soldering process.
www..com www..com
Amphenol
17D - xx - HVB 17 - 137 x 17 - 1657 17 - DTZK
17 - 15 xx - xx 17 - 16 xxx - xx
17 - DTK/17 - DTPK
17D - xx - H xxx 17DPPK - TM 17D PPK
PLASTIC HOODS
METALLIZED PLASTIC HOODS
METAL HOODS
Universal hood 17D - xx - H xxx
1 pcs plastic hood with "quick snap" locking and 2 cables entries straight and 45. UL
Universal hood 17D - xx - HVB
1 pcs metallized plastic hood with "quick snap" locking and 2 cable entries straight and 45.UL
FCC Hoods 17 - 1657
Metal hood - 2pcs design with screw locking. Plastic grommets for different cable diameters Straight cable entry. Complies with FCC 207 80.
2 pcs Hood 17 - 137 x
2 pcs plastic hood with screw locking. 2 cable entries straight and 45. UL - External cable metal clamp. UL.
1 pcs `quick snap locking' hood 17D PPK - TM
2 pcs metallized plastic hood with one straight cable entry and internal cable metal clamp. UL.
FCC Hoods - VDE 17 - DTZK
Metal hood - 2pcs design with screw locking. 360 shielding on the straight cable entry for a perfect shielding. Attenuation more than 40dB from 30 MHz a 1 GHz. Complies to VDE 0871 and FCC 20780. ESD protected.
2 pcs Hood 17 - 15 xx - xx 17 - 16 xxx - xx
2 pcs plastic hood with screw locking. 2 cable entries straight and 45. UL - Internal cable metal clamp. UL.
1 pcs `quick snap locking' hood 17D PPK
1 pcs plastic hood with one straight cable entry and internal cable metal clamp. UL.
Plastic hood with metal shielding can 17 - DTK/17 - DTPK
Plastic hood with internal metal shielding can. 1 pcs design with `quick snap-in locking'. 360 shielding on the straight cable entry for a perfect shielding. UL.
www..com www..com
Amphenol
Locking hardware
- 17D 51 xxx - x - 17D 53 018 - x
Sliding locks kit. Lockings must be separatley ordered (M3 or 4-40).
- 17D 20418 - xxxxx - x
Female jackscrew available with different length M3 or 4-40 tin or yellow chromated plating. (2 lockings necessary par connector. Standard 10 pcs plastic bag packaging).
- 17D 20419 - xx - x - 17D 20420 - xx - xx
Male lockings available with tin or yellow chromated plating.
- 17-529 / 17-770
Spring latch lockings.
Dust covers
- 17D 4K 630 xxx
Dust metal cover for female connector supplied with or without chain.
- 17D 4K 631 xxx
Dust metal cover for male connector supplied with or without chain.
www..com www..com
TS
D-Sub connectors - Stamped and Formed Contacts
STRAIGHT PCB TERMINATION ONE METAL SHELL CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Specifications
* UL File: E119881 * Connectors according to MIL C24308 Materials and platings Shells Insulator Contacts Boardlock Screwlock Steel with nickel plating Glass-filled thermoplastic, UL 94V-0 Copper alloy, selective gold plating Brass with nickel plating Brass with nickel plating
The one shell D-sub Amphenol series features, stamped and formed contacts. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 600V AC/rms 50Hz 1000V AC/rms 50Hz for one minute 5000M 10m max
Climatic Data Operating temperature -55C to +125C
Economical straight PCB, one shell connectors
Mechanical Data Mating and unmating force Unit: kg (lb)
No. of Cts 9 15 25 37 Mate (max) 3.05 5.09 8.44 12.51 (6.74) (11.24) (18.66) (27.65) Unmate (min) 0.36 0.46 0.81 1.1 (0.79) (1.01) (1.8) (2.47)
* Industrial * Telecom * Any industry standard
I / O connections
Standard plating thicknesses
* gold flash * 0.4m (15") gold * 0.76m (30") gold
E271/A
TS
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
8.38 0.13 (.33 .005)
A0.38 (.015) B0.13 (.005) C0.13 (.005) D0.13 (.005) POSITION #1 7.90.13 (.311.005)
2.84 (.112)
10
2.77 (.109) 3.18 (.125) 4.8 (.189)
6.1 (.240)
PLUG
SOCKET
12.550.38 (.494.015)
7.7 (.303)
0.8 (.031) *see chart "how to order"
Recommanded P.C.B. Layout RECOMMENDED P.C.B. LAYOUT
B E o3.2 (.126) C L 1.42 (.560)
o1.19 (.47)
1.385 (.055) 2.77 (.109)
Nb OF CONTACTS 9 15 25 37
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.34 (2.73)
DIMENSIONS mm (inch) B C
24.99 (.984) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 16.92 (.666) 25.25 (.994) 38.96 (1.53) 55.42 (2.18)
D
16.26 (.640) 24.56 (.967) 38.30 (1.51) 54.76 (2.16)
E
11.08 (.436) 19.39 (.763) 33.24 (1.31) 49.86 (1.96)
www..com www..com
Panel mounting option
#4-40 #4-40
o3.25 (.128)
o3.25 (.128)
Standoff boardlock RM8
Standoff boardlock RM5
How to order
...
TS
...
...
...
...
...
gold flash
77 717 177 777
tinned shell for receptacle tinned shell + dimples for plug tinned shell for receptacle tinned shell + dimples for plug
grounding tabs: RM5 = retention clip RM8 = retention clip +front screwlock
0.76m (30")
termination: OL2 : L = 6.02mm (.237") OL2C: L = 11.48mm (.452") OL2E: L = 11.95mm (..470")
shell size: E,A,B,C contact type: P = pin S = socket
configuration: 09,15,25,37
5.6 (.220)
For special request, please consult factory
TS
HOW TO ORDER
www..com www..com
SD
D'Sub connectors - Stamped and Formed Contacts
STRAIGHT PCB TERMINATION STANDARD and HIGH DENSITY
MAIN CHARACTERISTICS DESCRIPTION APPLICATIONS Specifications
* UL File: E149426 * Connectors according to: MIL C24308 - NFC 93425-HE5 Materials and platings Shells Insulator Pin contact Steel Glass-filled thermoplastic, UL 94V- 0 Brass, selected gold in mating area; 2.54m (100 ") min. tin-lead on termination area over 1.27m (50") min.nickel Phosphor bronze, selected gold in mating area; 2.54 (100") min. tin-lead on termination area over 1.27m (50") min. nickel Brass, 2.54m (100") min. nickel plated Brass, 2.54m (100") min. nickel plated Brass, 2.54m (100") min. nickel plated (removable) Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance Standard Density: 5A per contact High Density: 3A per contact 250V AC/ rms 50Hz 1000V AC/ rms 50Hz for one minute 1000M at 500V DC 20 m max
Socket contact
The Amphenol "SD" series features precision formed contacts, and insulator with closed entry contacts cavities. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements.
Rear insert Boardlock Screwlock
Economical straight PCB mount connectors
Climatic Data Operating temperature Salt spray -55C to +125C 24 hours Mechanical Data Single contact insertion force Single contact withdrawal force Mating and unmating force Unit: kg ( lb)
No. of Pos SD 9 15 25 37 50 HD 15 26 44 62 78 Mate (max) 3.05 5.09 8.44 12.51 14.65 (6.74) (11.24) (18.66) (27.65) (32.38) SD Unmate (min) 0.36 0.46 0.81 1.1 1.6 (0.79) (1.01) (1.8) (2.47) (3.56) HD Mate (max) 3.81 (8.42) 5.95 (13.16) 9.26 (20.46) 13.48 (29.78) 15.82 (34.96) Unmate (min) 0.52 1.05 1.37 1.76 2.02 (1.14) (2.32) (3.02) (3.88) (4.46)
* Industrial * Telecom * Any industry standard
I / O connections
0.54kg (1.19 lb) max S D: 0.06kg (0.13lb) min H D: 0.02kg (0.044lb) min
Standard plating thicknesses
* gold flash, * 0.381m (15") gold, * 0.76 m (30") gold
E241/D
SD
www..com www..com
OVERALL DIMENSIONS
Standard Density
8.380.13 (.330.005) A0.38 (.015) B0.13 (.005) C0.13 (.005) 2.84 (.078) D0.13 (.005) E0.05 (.002) POSITION #1 4.4 (.173) 0.4 (.016)
12.550.38 (.4940.015) 7.90.13 (.3110.005)
o 0.62 (.024)
10 5.9 (.232)
2.77 (.109)
DETAIL A
PLUG
SOCKET
6.1 (.240)
J*
F0.13 (.005) * see chart "panel mounting option"
A
10.72 (.422)
Nb OF CONTACTS 9 15 25 37 50
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73) 67 (2.64)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 61.11 (2.41) 16.92 (.67) 24.7 (.972) 38.96 (1.53) 55.42 (2.18) 52.86 (2.08) 16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16) 52.34 (2.06)
E
11.09 (.44) 19.39 (.76) 33.24 (1.31) 49.86 (1.96) 44.32 (1.75)
F
19.28 (.76) 27.51 (1.08) 41.30 (1.63) 57.71 (2.27) 55.3 (2.18)
A0.38 (.015) 11.20.13 (.4410.005) B0.13 (.005) C0.13 (.005) 2.84 (.112) D0.13 (.005) E0.13 (.005) POSITION #1 15.370.38 (.6050.015) 10.90.13 (.4290.005)
2.84
10
2.77 (.109) 13.56 (.534)
PLUG
SOCKET
6.1 (.240) F0.38 (.015)
50 CONTACTS
4.4 (.173)
5.9 (.232)
J
www..com www..com
High Density
8.380.13 (.330.005) A0.38 (.015) B0.13 (.005) C0.13 (.005) D0.13 (.005) POSITION #1 12.550.38 (.4940.015) 7.90.13 (.3110.005)
1.98
10
2.290.05 (.090.002) 6.1 (.240) 4.2 (.165)
5.9 (.232)
PLUG
SOCKET
J*
E0.13 (.005) * see chart "panel mounting option" 10.72 (.422)
Nb OF CONTACTS 15 26 44 62 78
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73) 67 (2.64)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 61.11 (2.41) 16.92 (.67) 24.7 (.972) 38.96 (1.53) 55.42 (2.18) 52.86 (2.08) 16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16) 52.34 (2.06)
E
19.28 (.76) 27.51 (1.08) 41.30 (1.63) 57.71 (2.27) 55.3 (2.18)
A0.38 (.015) 2.08 (.082)x3=6.24 (.246) 15.370.38 (.6050.015) B0.13 (.005) 45.790.13 (1.8030.005) C0.13 (.005) D0.13 (.005)
11.20.13 (.4410.005)
POSITION #1
10.90.13 (.4290.005)
10
2.41 (.095) 6.1 (.240)
5.9 (.232)
0.38 E0.38 (.015) 13.56 (.534)
78 CONTACTS
4.2 (.165)
PLUG
SOCKET
J
SD
OVERALL DIMENSIONS
1.98 (.078)
www..com www..com
HOW TO ORDER
Panel mounting option
M3 or # 4-40 screwlock M3 or # 4-40 H = # 4-40 G = M3 H = # 4-40 G = M3
5.0 (.197)
J
X Y
X Y 4.8 (.189)
5.9 (.232)
RM5 RM8 X Y J 6.0(.236) 4.2(.126) 6.2(.244)
RM5G RM8G 12.7(.500) 3.2(.126) 11.8(.465)
..... ..... ..... ..... ..... ..... OL2 .....
C309
gold flash
77: tinned shell for receptable 717: tinned shell + dimples for plug
177: tinned shell for 0.4m receptable (15") 777: tinned shell + dimples for plug
plating option: valid only for 0.76m (30") part numbers to be written as follow: or 77...................C309 717.................C309
grounding tabs : RM5 = retention clip RM8 = retention clip + front screwlock
SD: standard density HD: high density
Termination Straight for PCB
shell size: E, A, B, C, D contact type : P = pin S = socket
mounting type : H = rear insert 4-40 G = rear insert M3 no digit = standard rivet 3.05mm H,G must also be used to specify the threading of RM5 or RM8 grounding tabs.
configuration : SD : 9,15,25,37,50 HD : 15,26,44,62,78
: Standard options
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol
Amphenol Socapex
Telecom Business Unit 21, chemin du Defois - BP 349 F - 39100 Dole Fax: +33 (0) 3 84 82 94 11
http://www.dsubconnector.com
Technical support Tel.: +33 (0) 3 84 82 94 00
E241/D The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
How to order
Mediasquare +33 (0) 1 46 31 36 36
Front Female Screwlock
Threaded Rear Insert
RM5 Standoff Boardlock
RM8 Standoff Boardlock
www..com www..com
SD
D'Sub connectors - Stamped and Formed Contacts
SOLDER-CUP TERMINATION STANDARD and HIGH DENSITY
MAIN CHARACTERISTICS DESCRIPTION APPLICATIONS Specifications
* UL File: E149426 * Connectors according to: MIL C24308 - NFC 93425-HE5 Materials and platings Shells Insulator Pin contact Steel Glass-filled thermoplastic, UL 94V- 0 Brass, selected gold in mating area; 2.54m (100 ") min. tin-lead on termination area over 1.27m (50") min.nickel Phosphor bronze, selected gold in mating area; 2.54 (100") min. tin-lead on termination area over 1.27m (50") min. nickel Brass, 2.54m (100") min. nickel plated Brass, 2.54m (100") min. nickel plated (removable) Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance Standard Density: 5A per contact High Density: 3A per contact 250V AC/ rms 50Hz 1000V AC/ rms 50Hz for one minute 1000M at 500V DC 20 m max Climatic Data Operating temperature Salt spray -55C to +125C 24 hours Mechanical Data Single contact insertion force Single contact withdrawal force Mating and unmating force Unit: kg ( lb)
No. of Cts SD 9 15 25 37 50 HD 15 26 44 62 78 Mate (max) 3.05 5.09 8.44 12.51 14.65 (6.74) (11.24) (18.66) (27.65) (32.38) SD Unmate (min) 0.36 0.46 0.81 1.1 1.6 (0.79) (1.01) (1.8) (2.47) (3.56) HD Mate (max) 3.81 (8.42) 5.95 (13.16) 9.26 (20.46) 13.48 (29.78) 15.82 (34.96) Unmate (min) 0.52 1.05 1.37 1.76 2.02 (1.14) (2.32) (3.02) (3.88) (4.46)
The Amphenol "SD" series features precisionformed contacts, and insulator with closed entry contacts cavities. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements.
Socket contact
Rear insert Screwlock
Economical solder cup connectors
0.54kg (1.19 lb) max S D: 0.06kg (0.13lb) min H D: 0.02kg (0.044lb) min
* Industrial * Telecom * Any industry standard
I / O connections
Standard plating thicknesses
* gold flash, * 0.381m (15") gold, * 0.76 m (30") gold
E240/B
SD
www..com www..com
OVERALL DIMENSIONS
Standard Density
A0.38 (.015) 8.380.13 (.330.005) B0.13 (.005) C0.13 (.005) D0.13 (.005) E0.05 (.002) POSITION #1 12.550.38 (.4940.015) 7.90.13 (.3110.005) O3.05 (.120 dia) 3 (.118) 12.5 (.492) 11.2 (.441) 6.1 (.240) 10.72 (.422)
2.84 (.112)
10
2.77 (.109)
5.9 (.232)
PLUG
SOCKET
11 (.433) 12.3 (.484)
F0.13 (.005)
Nb OF CONTACTS 9 15 25 37 50
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73) 67 (2.64)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 61.11 (2.41) 16.92 (.67) 24.7 (.972) 38.96 (1.53) 55.42 (2.18) 52.86 (2.08) 16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16) 52.34 (2.06)
E
11.09 (.44) 19.39 (.76) 33.24 (1.31) 49.86 (1.96) 44.32 (1.75)
F
19.28 (.76) 27.51 (1.08) 41.30 (1.63) 57.71 (2.27) 55.3 (2.18)
A0.38 (.015) 11.20.13 (.4410.005) B0.13 (.005) C0.13 (.005) 2.84 (.112) D0.13 (.005) E0.13 (.005) POSITION #1 15.370.38 (.6050.015) 3 (.118) 11.2 (.441) 6.1 (.240) 12.5 (.492) 13.56 (.534) 10.90.13 (.4290.005)
2.84
10
2.77 (.109)
O3.05 (.120 dia)
5.9 (.232) 11 (.433)
PLUG 12.3 (.484)
SOCKET
F0.38 (.015)
50 CONTACTS
www..com www..com
High Density
12.550.38 (.4940.015) 7.90.13 (.3110.005)
8.380.13 (.330.005)
A0.38 (.015) B0.13 (.005) C0.13 (.005) D0.13 (.005) POSITION #1
1.98
1.98 (.078)
10 5.9 (.232)
O3.05 (.120) 2.290.05 (.090.002) 11.2 (.441) 6.1 (.240) 12.2 (.48) 3 (.118)
12 (.472)
11 (.433)
PLUG
SOCKET
E0.13 (.005)
5 (.197)
10.72 (.422)
Nb OF CONTACTS 15 26 44 62 78
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73) 67 (2.64)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 61.11 (2.41) 16.92 (.67) 24.7 (.972) 38.96 (1.53) 55.42 (2.18) 52.86 (2.08) 16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16) 52.34 (2.06)
E
19.28 (.76) 27.51 (1.08) 41.30 (1.63) 57.71 (2.27) 55.3 (2.18)
2.08 (.082)x3=6.24 (.246)
A0.38 (.015) B0.13 (.005) C0.13 (.005) D0.13 (.005) 45.790.13 (1.8030.005) POSITION #1 15.370.38 (.6050.015) 10.90.13 (.4290.005)
11.20.13 (.4410.005)
10 2.41 (.95)
O3.05 (.120)
6.1 (.240)
11.2 (.441)
5.9 (.232)
11 (.433)
12 (.472)
PLUG
SOCKET
5 (.197)
E0.38 (.015)
12.2 (.48)
3 (.118)
13.56 (.534)
78 CONTACTS
SD
OVERALL DIMENSIONS
www..com www..com
HOW TO ORDER
Panel mounting option
M3 or #4-40 screwlock
M3 or #4-40
5 (.197)
Front Female Screwlock VF / VFM
Threaded Rear Insert H/G
How to order
.....
.....
.....
.....
.....
.....
.....
C309
gold flash
77: tinned shell for receptable 717: tinned shell + dimples for plug
177: tinned shell for 0.4m receptable (15") 777: tinned shell + dimples for plug
plating option: valid only for 0.76m (30") part numbers to be written as follow: or 77...................C309 717.................C309
front mounting type : VF = front screwlock 4-40 VFM = front screwlock M3
SD: standard density HD: high density
contact type : P = pin S = socket
shell size: E, A, B, C, D
configuration : SD : 9,15,25,37,50 HD : 15,26,44,62,78
rear mounting type : H = rear insert 4-40 G = rear insert M3 no digit = standard rivet 3.05mm : Standard options
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol
Amphenol Socapex
Telecom Business Unit 21, chemin du Defois - BP 349 F - 39100 Dole Fax: +33 (0) 3 84 82 94 11
http://www.dsubconnector.com
Technical support Tel.: +33 (0) 3 84 82 94 00
E240/B
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
Mediasquare +33 (0) 1 46 31 36 36
3.4 (.134)
www..com www..com
SD
D'Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE, BOARD MOUNT CONNECTORS
MAIN CHARACTERISTICS DESCRIPTION APPLICATIONS Specifications
* A4 Style (MIL footprint): UL File: E149426 * 1A Style (European footprint): UL File: E112081 * Connectors according to: MIL C24308 - NFC 93425-HE5 Materials and platings Shells Insulator Pin contact Steel, tin plated Glass-filled thermoplastic, UL 94V- 0 Brass, selected gold in mating area; 2.54m (100 ") min. tin-lead on termination area over 1.27m (50") min.nickel Phosphor bronze, selected gold in mating area; 2.54 (100") min. tin-lead on termination area over 1.27m (50") min. nickel Brass, 2.54m (100") min. nickel plated 4 finger phosphor bronze, 2.54m (100") min. tin-lead plated Brass, 2.54m (100") min. nickel plated (removable) Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A per contact 250V AC/ rms 50Hz 1000V AC/ rms 50Hz for one minute 5000M at 500V DC 15 m max Climatic Data Operating temperature Salt spray -55C to +125C 24 hours Mechanical Data Single contact insertion force Single contact withdrawal force Mating and unmating force Unit: kg ( lb)
A4 Style No. of Cts 9 15 25 37 Mate (max) 3.05 5.09 8.44 12.51 (6.74) (11.24) (18.66) (27.65) Unmate (min) 0.36 0.46 0.81 1.1 (0.79) (1.01) (1.8) (2.47) 1A Style Mate (max) 4.6 7.7 12.7 17.7 (10.17) (17.02) (28.07) (39.12) Unmate (min) 0.4 0.5 0.8 1.2 (0.88) (1.10) (1.77) (2.65)
The Amphenol "SD" series features precision formed contacts and 4 finger boardlocks. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements.
Socket contact
Rear insert Boardlock Screwlock
Economical right angle PCB mount connectors
* Industrial * Telecom * Any industry standard
I / O connections
0.54kg (1.19 lb) max 0.06kg (0.13lb) min
Standard plating thicknesses
* gold flash, * 0.381m (15") gold, * 0.76 m (30") gold
E242/B
SD
www..com www..com
OVERALL DIMENSIONS
A4 style (MIL Footprint)
B0.13 (.005) C0.13 (.005) D0.13 (.005) E0.05 (.002) POSITION #1 POSITION #1 7.90.13 (.310.005) A0.38 (.015) 12.550.38 (.490.015)
10 2.84 (.112)
B0.05 (.002) 1.42 (.06) E0.05 (.002) F0.1 (.004) POSITION #1
8.380.13 (.130.005)
1.42
2-O3.2 (.126)
O1 (.04)
2.80.4 (.110.016)
F0.1 (.004)
RECOMMENDED PCB LAYOUT 6.3 (.25)
PLUG
18.3 (.72)
SOCKET
6.1 9.5 (.37) (.24) 18.5 (.73) 8.08 (.32) 2.84 (.112)
5.9 (.23)
3.2 (.126)
Nb OF CONTACTS 9 15 25 37
A
30.81 (1.21) 39.14 (1.54) 53.04 (2.09) 69.32 (2.73)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 16.92 (.67) 25.25 (.99) 38.96 (1.53) 55.42 (2.18) 16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16)
E
11.09 (.44) 19.39 (.76) 33.24 (1.31) 49.86 (1.96)
F
2.74 (.108) 2.74 (.108) 2.77 (.109) 2.77 (.109)
1A style (European Footprint)
B0.13 (.005) C0.25 (.01) D0.25 (.01) E0.13 (.005) POSITION #1 POSITION #1 7.90.25 (.310.01) A0.38 (.015) 12.550.38 (.490.015)
8.360.13 (.240.01)
2.84 (.112)
10
B0.13 (.005) 1.27 (.05) E0.13 (.005) F0.1 (.004) POSITION #1
1.27
2-O3.2 (.126)
O1 mini (.04)
2.80.4 (.110.016)
F0.1 (.004)
RECOMMENDED PCB LAYOUT 10.3 (.406) 20.85 (.821) 2.54 (.1)
PLUG
20.3 (.811)
SOCKET
6.1 (.24)
5.9 (.23)
11.62 (.457)
7.2 (.283) 3.8 (.15)
Nb OF CONTACTS 9 15 25 37
A
30.89 (1.22) 39.1 (1.54) 53.09 (2.09) 69.4 (2.73)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 16.92 (.67) 25.25 (.99) 38.96 (1.53) 55.42 (2.18) 16.33 (.64) 24.66 (.97) 38.38 (1.51) 54.84 (2.16)
E
10.96 (.43) 19.18 (.755) 33.24 (1.31) 49.86 (1.96)
F
2.74 (.108) 2.74 (.108) 2.77 (.109) 2.77 (.109)
www..com www..com
Panel mounting option
M3 or #4-40 screwlock
4.8 (.189) M3 or #4-40
Front Female Screwlock 4F / 3F
Threaded Rear Insert 4R / 3R
How to order
.....
SD
.....
.....
.....
.....
CH
.....
C309
gold flash
77 tinned shell for receptable 717 tinned shell + dimples for plug 177 tinned shell for receptable 777 tinned shell + dimples for plug E, A, B, C
plating option: valid only for 0.76m (30") part numbers to be written as follow: or 77 SD...................C309 717 SD.................C309 mounting options: 4F = front screwlock 4-40 3F = front screwlock M3 4R = rear insert 4-40 3R = rear insert M3 PCB locking type: grounding tabs + board locks termination: 1A (European) A4 (MIL)
0.4m (15")
shell size:
configuration: 1A Style: 9,15,25,37 A4 Style: 9,15,25,37 contact type : P = pin S = socket : Standard options
For special request, please consult factory
SD
HOW TO ORDER
www..com www..com
SD
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE BOARD MOUNT CONNECTORS FOOTPRINT 14.99 mm (.590'')
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Unmate (min) 0.36 (0.79) 0.46 (1.01) 0.81 (1.8) 1.1 (2.47)
Specifications
* UL File: E119881 * Connectors according to MIL C24308
The Amphenol "SD" series features precision formed contacts and 4 finger boardlocks. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements.
Materials and platings Shells Insulator Contacts Rear insert Screwlock Grounding clip Steel with nickel plating Glass-filled thermoplastic, UL 94V-0 Copper alloy, selective gold plating Brass with nickel plating Brass with nickel plating Copper alloy with tin-lead plating
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 600V AC/rms 50Hz 1000V AC/rms 50Hz for one minute 5000M 10m max
Economical right angle PCB mount connectors
Climatic Data Operating temperature - 55C to + 125C
Mechanical Data Mating and unmating force Unit: kg (lb) No. of Cts 9 (size E) 15 (size A) 25 (size B) 37 (size C) Mate (max) 3.05 (6.74) 5.09 (11.24) 8.44 (18.66) 12.51 (27.65)
* Industrial * Telecom * Any industry standard
I/O connections
Standard plating thicknesses
* gold flash * 0.4m (15'') gold * 0.76m (30'') gold
E246/A
SD
www..com www..com
OVERALL DIMENSIONS
Shell Size Dimensions
A0.38 (.015) B0.13 (.005) C0.25 (.01) D0.25 (.01) POSITION #1
8.38 (.330)
2.84 (.112)
10
2.77 (.109)
6.1 (.240)
0.64 0.64 (.025 .025)
7.9 (.311)
12.55 (.494)
8 (.315)
2.84 (.112)
14.99 (.590)
3.18 (.125)
Recommanded P.C.B. Layout
2.84 (.112)
E0.13 (.005) C L
o1.19 (.047)
2 o3.05 (.120) 1.385 (.054) 6.99 (.275) 2.77 (.109) B0.13 (.005)
Nb of contacts
9 15 25 37
DIMENSIONS mm (inch) A
30.84 (1.214)
B
24.99 (.984)
C
16.92 (.666) 25.25 (.994)
D
16.26 (.640) 24.56 (.967)
E
11.08 (.436) 19.39 (.763) 33.24 (1.309
39.24 (1.545) 33.32 (1.312)
53.04 (2.088) 47.04 (1.852) 38.96 (1.534) 38.30 (1.508)
69.34 (2.730) 63.50 (2.500) 55.42 (2.182) 54.76 (2.156) 49.86 (1.963)
25.08 (.987)
12.1 (.476)
www..com www..com
Panel mounting option
#4-40 screwlock
4.8 (.189)
#4-40
Front Female Screwlock 4F
Threaded Rear Insert 4R
How to order .... SD .... .... .... AB CH .... C 309
gold flash
77 717 177 777
tinned shell for receptable tinned shell + dimples for plug tinned shell for receptable tinned shell + dimples for plug
0.4m (15")
Plating option: valid only for 0.76m (30'') part numbers must be written as follow: 77SD........................C309 or 717SD......................C309
shell size: E,A,B,C
mounting options: 4F = front screwlock 4-40 4R = rear insert 4-40
configuration: 09,15,25,37
contact type: P = pin S = socket
footprint: 14.99 mm (.590'')
For special request, please consult factory
SD
PCB locking type: grounding tabs + boardlocks
HOW TO ORDER
www..com www..com
RR-HR
D-Sub connectors - Stamped and Formed Contacts
REAR RELEASE CRIMP CONNECTORS
MAIN CHARACTERISTICS DESCRIPTION
Crimp side gold flash or tin gold flash or tin gold flash or tin
Specifications
* RR: UL File : E64911 * HR: UL File : E149426 * Connectors according to MIL C24308 Materials and platings Shells Steel yellow chromated over zinc or tinned steel with or without dimples on plug connector Black glass-filled thermoplastic, UL 94V-0 Brass, 3m up to 5m (118"up to 197") tinned over nickel 2m up to 3m (78" up to 118") Brass, 6m up to 10m (236" up to 394") tinned over nickel 2m up to 3m (78" up to 118")
Under plating 2m (78") nickel 2m (78") nickel 2m (78") nickel
Designed for high volume production, Amphenol's rear release crimp connector and contacts provide significant cost saving. - EMI / RFI shell configuration. - Removable, reusable contacts. - Automatic and manual tooling available.
Insulator Rear insert
Screwlock
Contacts 0.2m (8") gold 0.5m (20") gold 0.76m (30") gold
Simplify your cable assemblies
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance Wire size 5A 500V AC/rms 50Hz RR: 1000V AC/rms 50Hz for 1 minute HR: 1000V AC/rms 60Hz for 1 minute RR: 5000M HR: 1000M 10m max 20-28 AWG max insulation out O1.27mm (.05")
APPLICATIONS
* Industrial * Telecom * Any industry standard
I / O connections
Climatic Data Operating temperature -55C to +105C
Mechanical Data Mating and unmating force Unit: kg ( lb)
No. of Cts RR 9 (size E) 15 (size A) 25 (size B) 37 (size C) 50 (size D)
E260/A
Mate (max) RR HR
Unmate (min) RR 0.36 (0.79) 0.46 (1.01) 0.81 (1.8) 1.1 (2.47) 1.6 (3.56) HR 0.52 1.05 1.37 1.76 2.02 (1.14) (2.32) (3.02) (3.88) (4.46)
HR 15 (size E) 26 (size A) 44 (size B) 62 (size C) 78 (size D)
3.05 (6.74) 3.81 (8.42) 5.09 (11.24) 5.95 (13.16) 8.44 (18.66) 9.26 (20.46) 12.51 (27.65) 13.48 (29.78) 14.65 (32.38) 15.82 (34.96)
RR-RH
www..com www..com
OVERALL DIMENSIONS
Standard density RR
B0.13 (.005) 8.380.13 (.33.005) C0.13 (.005) D0.13 (.005) E0.05 (.002) POSITION #1 7.90.13 (.311.005) 11.2 (.441) 12.550.38 (.494.015) o3.05 (.120) 2.77 (.109) 6.1 (.240) A0.38 (.015)
2.84 (.112) 10
5.9 (.232)
PLUG
11 (.433)
SOCKET
10.72 (.422) 10.9 (.429) 5.8 (.228)
numbered cavities F0.13 (.005)
Nb OF CONTACTS 9 15 25 37 50
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73) 67 (2.64)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 61.11 (2.41) 16.92 (.67) 24.7 (.972) 38.96 (1.53) 55.42 (2.18) 52.86 (2.08) 16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16) 52.34 (2.06)
E
11.09 (.44) 19.39 (.76) 33.24 (1.31) 49.86 (1.96) 44.32 (1.75)
F
19.28 (.76) 27.51 (1.08) 41.30 (1.63) 57.71 (2.27) 55.3 (2.18)
11.20.13 (.441.005)
B0.13 (.005) C0.13 (.005) D0.13 (.005) 2.84 (.112) E0.13 (.005) POSITION #1
2.84
10
2.77 (.109)
10.90.13 (.429.005)
A0.38 (.015)
o3.05 (.120)
15.370.38 (.605@@.015)
5.9 (.232)
PLUG
11 (.433)
SOCKET
11.2 (.441) 6.1 (.240) 5.8 (.228) numbered cavities F0.38 (.015) 10.9 (.429) 13.56 (.534)
2
www..com www..com
High density HR
A0.38 (.015) 8.380.13 (.33.005) B0.13 (.005) C0.13 (.005) 1.98 (.078) D0.13 (.005) POSITION #1 7.90.13 (.311.005) 12.550.38 (.494.015)
1.98
10 2.290.05 (.090.002)
o3.05 (.120)
PLUG
5.9 (.232) 11 (.433)
SOCKET
11.2 (.441) 6.1 (.240) 10.72 (.422) 10.3 (.406) 5.2 (.205)
numbered cavities
E0.13 (.005)
Nb OF CONTACTS 15 26 44 62 44
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73) 67 (2.64)
DIMENSIONS mm (inch) B C
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 61.11 (2.41) 16.92 (.67) 24.7 (.972) 38.96 (1.53) 55.42 (2.18) 52.86 (2.08)
D
16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16) 52.34 (2.06)
E
19.28 (.76) 27.51 (1.08) 41.30 (1.63) 57.71 (2.27) 55.3 (2.18)
A0.38 (.015) 2.08 (.082)x3=6.24 (.246) B0.13 (.005) 10.90.13 (.429.005) C0.13 (.005) D0.13 (.005) 45.790.13 (1.80.005) POSITION #1 15.370.38 (.605.015)
11.20.13 (.441.005)
10 2.41 (.095)
o3.05 (.120)
3
PLUG
11 (.433) 5.9 (.232)
SOCKET
6.1 (.240) 11.2 (.441) 13.56 (.534) 10.3 (.406) 5.2 (.205)
numbered cavities E0.38 (.015)
RR-RH
OVERALL DIMENSIONS
www..com www..com
TECHNICAL DATAS
Panel mounting option
Standard density:
float
3.6 (.141")
o3.1 (.122")
o2.2 (.086")
Standard rivet o 3.1mm no digit
Float mounting F
6.2 (.244")
Threaded rear insert H/G
3.4 (.134")
M3 or #4-40
M3 or #4-40 front screwlock
Fixed front female screwlock VF / VFM
High density:
M3 or #4-40 6.8 (.268") o3.05 (.120")
Standard rivet o3.05mm no digit
Threaded rear insert H/G
5.8 (.228")
M3 or #4-40 front screwlock
4
Fixed front female screwlock VF / VFM
www..com www..com
Contacts
Standard density:
9.9 (.390") 1.75 (.069") 4.7 (.185")
o1.03 (.041")
C B
9.4 (.370") 1.75 (.069")
o2.1 (.083")
4.7 (.185")
AWG
20-24 24-28
A
1.8 (.071") 1.4 (.055")
B
1.9 (.075") 1.5 (.059")
C
2.5 (.098") 1.7 (.066")
High density:
7.7 (.303") 0.95 (.037")
o2.1 (.083")
6.15 (.242")
o0.76 (.030")
1.65 (.065") 1.3 (.051")
o1.55 (.061")
1.55 (.061")
A
A
7.3 (.287") 0.9 (.035")
6.15 (.242")
5
o1.5 (.059") 1.55 (.061")
RR-RH
TECHNICAL DATAS
www..com www..com
TECHNICAL DATAS
How to order RR (standard density)
Housings
.....
RR
..... ..... ..... ..... .....
117: yellow chromated shell 177: tinned shell for receptacle 777: tinned shell + dimples for plug
front mounting type : VF = front screwlock 4-40 VFM = front screwlock M3
shell size: E, A,B,C,D
contact type: P = pin S = socket
rear mounting type : H = rear insert 4-40 G = rear insert M3 no digit = standard rivet o3.1mm F = float mounting
configuration: 09,15,25,37,50
Contacts
17
RR
..... .....
.....
.....
wire size: D1: 20 to 24 AWG D2: 24 to 28 AWG
contact type: M = male F = female
packaging : 100 = bulkpack unit (100 cts) 400 = reel of 400 cts 2K = reel of 2000 cts 10K = reel of 10000 cts (right feed reel) 10G = reel of 10000 cts (left feed reel)
REEL WINDING DIRECTION
full gold plating: 01 = 0.2m (8") 02 = 0.5m (20") 04 = 0.76m (30") selective gold plating: 11 = 0.2m (8") Au + 2m (78") SnPb 12 = 0.5m (20") Au + 2m (78") SnPb 14 = 0.76m (30") Au + 2m (78") SnPb
Left to right feed reel: G Right to left feed reel: K
6
For special request, please consult factory
www..com www..com
How to order HR (high density)
Housings
.....
HR
..... ..... ..... ..... .....
117: yellow chromated shell 177: tinned shell for receptacle 777: tinned shell + dimples for plug
front mounting type : VF = front screwlock 4-40 VFM = front screwlock M3
shell size: E, A,B,C,D
contact type: P = pin S = socket
rear mounting type : H = rear insert 4-40 G = rear insert M3 no digit = standard rivet o3.05mm
configuration: 15,26,44,62,78
Contacts
17
HR
D2 .....
.....
.....
wire size: 24 to 28 AWG
contact type: M = male F = female
packaging : 5K = reel of 5000 cts (right feed reel) 5G = reel of 5000 cts (left feed reel) 10K = reel of 10000 cts (right feed reel) 10G = reel of 10000 cts (left feed reel)
REEL WINDING DIRECTION
7
For special request, please consult factory
D-DF
full gold plating: 01 = 0.2m (8") 02 = 0.5m (20") 04 = 0.76m (30") selective gold plating: 11 = 0.2m (8") Au + 2m (78") SnPb 12 = 0.5m (20") Au + 2m (78") SnPb 14 = 0.76m (30") Au + 2m (78") SnPb
Left to right feed reel: G Right to left feed reel: K
HOW TO ORDER
www..com www..com
HD
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE HIGH DENSITY CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Specifications
* UL File : E119881 * Connectors according to MIL C24308 Materials and platings Shells Insulator Contacts Rear insert Screwlock Grounding clip Steel with nickel plating Glass filled thermoplastic, UL 94V-0 Copper alloy, selective gold plating Brass with nickel plating Brass with nickel plating Copper alloy with tin-lead plating
Amphenol's high density D-Sub connectors complement Amphenol's extensive D-Sub connector line. This line offers many superior features, high performance level and low installation cost. The decreased contact spacing accommodates greater signal density in comparison to conventional D-Sub connectors.
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 600V AC/rms 50Hz 1000V AC/rms 50Hz for one minute 5000M 10m max
Economical right angle PCB
Climatic Data Operating temperature -55C to +125C
Mechanical Data Mating and unmating force Unit: kg ( lb)
No. of Cts 15 26 44 62 Mate (max) 3.81 5.95 9.26 13.48 (8.42) (13.16) (20.46) (29.78) Unmate (min) 0.52 1.05 1.37 1.76 (1.14) (2.32) (3.02) (3.88)
* Industrial * Telecom * Any industry standard
I / O connections
Standard plating thicknesses
* gold flash * 0.4m (15") gold * 0.76 m (30") gold
E247/A
HD
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
A 12.55 (.494) 7.9 (.311) B C POSITION #1 1.98 (.078) 1.98 (.078)
D 10
11.43 (.450)
22.22 (.875)
2.54 (.100)
2.54 (.100)
8.89 (.350)
3.18 (.125)
Nb OF CONTACTS 15 26 44 62
A
30.84 (1.214) 39.24 (1.545) 53.04 (2.088) 69.34 (2.730)
DIMENSIONS mm (inch) B C
24.99 (.984) 33.32 (1.312) 47.04 (1.852) 63.50 (2.500) 16.26 (.640) 24.56 (.967) 38.30 (1.508) 54.76 (2.156)
D
2.29 (.090) 2.29 (.090) 2.29 (.090) 2.41 (.095)
www..com www..com
P.C.B. Layout
B 3.69 (.145) 0.25 (.010) 2.54 (.100) D C L O3.05 (.120) O1.19 (.047) D 0.89 (.035) 4.83 (.190) 5.47 (.215) 24.71 (.973) 0.59 (.023)
B 23.54 (.927)
C L O3.05 (.120) O1.19 (.047) 22.3 (.878) 23.5 (.925) 24.75 (.974) 0.63 (.025)
4.33 (.171)
15 PIN
2.54 (.100)
62 PIN
B 9.65 (.380) 0.51 (.020) 2.54 (.100) D C L O3.05 (.120) 2.54 (.100) O1.19 (.047) 7.37 (.290) 8.5 (.335) 9.78 (.385) 0.64 (.025) 8.63 (.340) 16.51 (.650) 0.51 (.020) D
B 15.49 (.610)
C L O3.05 (.120) O1.19 (.047) 14.23 (.560) 15.36 (.605) 16.64 (.655) 0.64 (.025)
26 PIN
44 PIN
Panel mounting option
# 4-40 screwlock
# 4-40
2.54 (.100)
2.54 (.100)
Front female screwlock 4F
5.6 (.220)
Threaded rear insert 4R
HD
TECHNICAL DATAS
www..com www..com
HOW TO ORDER
How to order
... HD ...
...
S D1 CH ... C309
0.4m (15")
177 777
tinned shell for receptacle tinned shell + dimples for plug
configuration: 15,26,44,62 PCB locking type: grounding tabs + boardlocks
socket contact
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol
Amphenol Socapex
Telecom Business Unit 21, chemin du Defois - BP 349 F - 39100 Dole Fax: +33 (0) 3 84 82 94 11
http://www.dsubconnector.com
Technical support Tel.: +33 (0) 3 84 82 94 00
E247/A
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
shell size: E,A,B,C
mounting options: 4R = rear insert 4-40 4F = front screwlock 4-40
Mediasquare +33 (0) 1 46 31 36 36
gold flash
77 717
tinned shell for receptacle tinned shell + dimples for plug
plating option valid only for 0.76m (30") part numbers must be written as follow : 77HD..............C309 or 717HD.............C309
www..com www..com
D-DF
D-Sub connectors - Screw-machined Contacts
FIXED MACHINED CONTACT CONNECTOR
MAIN CHARACTERISTICS DESCRIPTION APPLICATIONS Specifications
* UL File: E64911 * Connectors according to: MIL C24308 - NFC93425-HE5 Materials and platings Shells Steel yellow chromated over zinc or tinned steel with or without dimples on plug connector Glass-filled thermoplastic, UL 94V-0 Brass, 3m up to 5m (118"up to 197") tinned over nickel 2m up to 3m (78" up to 118") Tin-lead plating 4m up to 6m (157" up to 236") over nickel 2m up to 3m (78" up to 118") Brass, 6m up to 10m (236" up to 394") tinned over nickel 2m up to 3m (78" up to 118") D: brass DF: pin = brass socket = copper alloy Right angle version: selective gold in mating area over 2m up to 3m (78" up to 118") nickel; 3m up to 5m (118" up to 197") tin-lead on termination area over 2m up to 3m (78" up to 118") nickel Straight version: full gold plating over 2m up to 3m (78" up to 118") nickel Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 7.5 A 300 V AC/rms 50Hz 1000V AC/rms 50Hz for one minute 5000M D: 8.5m max DF: 5m max Climatic Data Operating temperature Operating temperature Operating temperature D: -55C to + 85C (peaks at 125C) DF: -55C to +125C 48 hours D: 21 days (40C - 95% HR) DF: 56 days (40C - 95% HR) Mechanical Data Mating and unmating force Unit: kg ( lb)
No. of Cts 9 (size E) 15 (size A) 25 (size B) 37 (size C) 50 (size D) Mate (max) 3.05 5.09 8.44 12.51 14.65 (6.74) (11.24) (18.66) (27.65) (32.38) Unmate (min) 0.36 0.46 0.81 1.1 1.6 (0.79) (1.01) (1.8) (2.47) (3.56)
Amphenol's 17D and 17DF series fixed contact D-Subminiature connector is suitable for industrial or telecom use. The machined contact provide stability and reliability. This series offers the broadest range of termination options in the Amphenol line.
Insulator Rear insert
Boardlock
Screwlock
Contacts
Connectors for industrial and telecom use
* Industrial * Telecom * Any industry standard
I / O connections
E270/B
D-DF
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
Shell size
Contact
P: Pin S: Socket
A
0.25 (.010)
B
0/-0.20 (0/-.008)
B'
+0.20/0 (+.008/0)
C
0.10 (.004)
D
0/-0.25 (0/-.010)
D'
+0.25/0 (+.010/0)
E
0.20 (.008)
F
F' 10.9 (.429")
G
G'
0.10 (.004)
H
J
+0.05/-0.20 +0.10/-0.20 +0.10/-0.20 (+.002/-.008) (+.004/-.008) (+.004/-.008)
+0.10/-0.40 0/-0.50 (+.004/-.016) (0/-.020)
P E S P A S P B S P C S P D S
30.7 (1.209")
16.8 (.661") 16.4 (.646") 25.1 (.988") 24.8 (.976")
25.0 (.984")
8.2 (.323") 8.0 (.315") 8.2 (.323") 8.0 (.315") 8.2 (.323") 8.0 (.315") 8.2 (.323") 8.0 (.315") 11.0 (.433") 10.9 (.429")
12.4 (.488")
5.9 (.232") 6.2 (.244")
11.1 (.437") 10.9 (.429") 11.1 (.437") 11.0 (.433") 11.1 (.437") 11.0 (.433") 11.1 (.437") 11.0 (.433") 11.1 (.437")
19.4 11.0 (.764") (.433")
39.0 (1.535")
33.3 (1.311")
12.4 (.488")
5.9 (.232") 6.2 (.244") 5.8 (.228") 6.2 (.244") 5.8 (.228") 6.2 (.244") 5.8 (.228") 6.2 (.244")
27.7 11.0 (1.091") (.433")
52.9 (2.083")
38.5 (1.513")
38.8 (1.528") 47.0 (1.850") 55.3 (2.177") 63.5 (2.500") 52.7 (2.075") 61.1 (2.406")
12.4 (.488")
41.4 11.0 (1.630") (.433")
69.2 (2.724")
54.9 (2.161")
12.4 (.488")
57.9 11.0 (2.280") (.433")
66.8 (2.630")
52.5 (2.067")
15.2 (.598")
55.5 13.8 (2.185") (.543")
Panel cutouts
Optimal cutout for rear mounting Standard cutout
A B oG 10 GH B
A 10 F E
D C
Shell size Mounting method Front E Rear Front A Rear Front B Rear Front C Rear Front D Rear A
0.20 (.008)
Rd Rading J
B
0.20 (.008)
R
D C
E F
0.20 (.008)
Rd Rading J
H
0.20 (.008)
C
0.20 (.008)
D
0.20 (.008)
G
0.20 (.008)
J
0.20 (.008)
0.20 (.008)
22.2 (.874") 20.5 (.807") 30.5 (1.201") 28.8 (1.134") 44.3 (1.744") 42.5 (1.673") 60.7 (2.390") 59.1 (2.327") 58.3 (2.295") 56.3 (2.217")
11.1 (.437") 10.2 (.402") 15.3 (.602") 14.4 (.567") 22.1 (.870") 21.3 (.839") 30.4 (1.197") 29.5 (1.161") 29.2 (1.150") 28.2 (1.110")
25.0 (.984")
12.5 (.492")
13.0 (.512") 11.4 (.449") 13.0 (.512") 11.4 (.449") 13.0 (.512") 11.4 (.449") 13.0 (.512") 11.4 (.449") 15.8 (.622") 14.1 (.555")
6.5 (.256") 5.7 (.224") 6.5 (.256") 5.7 (.224") 6.5 (.256") 5.7 (.224") 6.5 (.256") 5.7 (.224") 7.9 (.311") 7.1 (.280")
3.0 (.118")
1.5 (.059")
2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134")
33.3 (1.311")
16.7 (.657")
3.0 (.118")
1.5 (.059")
47.0 (1.850")
23.5 (.925")
3.0 (.118")
1.5 (.059")
63,5 (2.500")
31,7 (1.248")
3.0 (.118")
1.5 (.059")
2
61.1 (2.406")
30.6 (1.205")
3.0 (.118")
1.5 (.059")
www..com www..com
Termination
Right angle: MIL Footprint
without bracket:
2.84 (.112") 2.84 (.112")
o1.02 (.040")
9.3 (.366")
o0.6 (.024")
C
A4
plastic bracket:
8.1 (.319") 2.84 (.112") 8.1 (.319") 2.84 (.112")
6.3 (.248") 3 (.118")
o1.02 (.040")
6.3 (.248") 3 (.118")
o0.6 (.024")
AJ3
AJ4
metal bracket:
8.1 (.319")
2.84 (.112") 3 (.118")
9.3 (.366")
8.1 (.319")
8.1 (.319")
2.84 (.112") 3 (.118")
6.3 (.248")
14.99 (.59") 2.84 (.112") 3.2 (.126")
6.3 (.248")
6.3 (.248")
o1.02 (.040") 8.1 (.319")
o0.6 (.024") A
o0.6 (.024")
A
AM4 : A=13.2mm AZ4 : A=11.5mm
AM4B
7.7 (.303")
3 50 contacts:
8.1 (.319") 2.84 (.112")
3 (.118")
D-DF
TECHNICAL DATAS
www..com www..com
TECHNICAL DATAS
Termination
European footprint
without bracket:
X
10.3 (.406") 11.2 (.441") o0.6 (.024")
1AON : X=2.54mm 1BON : X=2.84mm plastic bracket:
6.2 (.244") 10.3 (.406") X 4 (.157") 10.3 (.406") X 4 (.157") 7.2 (.283") o0.6 (.024")
7.2 (.283")
o0.6 (.024")
1APN : X=2.54mm 1BPN : X=2.84mm
1AUN : X=2.54mm 1BUN : X=2.84mm
6.2 (.244") 10.3 (.406")
10.3 (.406") X 4 (.157")
X 4 (.157") 7.2 (.283") o0.6 (.024")
7.2 (.283")
o0.6 (.024")
1AMN : X=2.54mm 1BMN : X=2.84mm
1ATN : X=2.54mm 1BTN : X=2.84mm
8.6 (.339")
50 contacts:
10.3 (.406") X
4 (.157")
4
www..com www..com
Termination
Solder Cup:
5.6 (.220")
Wire Wrap:
2.8 (.110")
termination
5.6 (.220") L 0.78/0.86 (.0.31"/.034")
Nb of wraps
2 3
L
9.6mm (.378") 13mm (.512")
F179 F179A
Straight PCB:
termination
5.6 (.220") L o 1.52 (.060") max
O
0.6mm (.024") 1.02mm (.040") 0.6mm (.024") 0.6mm (.02")
L
3.2mm (.126") 2.4mm (.095") 4mm (.157") 5.5mm (.217")
U V T OL2
Grounding tabs
For straight termination
M3 or #4-40 #4-40
For R/A termination
FOR PCB 1.6
7.2 (.283")
for holes o3.2 (.126")
for holes o3.2 (.126")
7.2 (.283")
6.2 (.244")
for holes o3.2 (.126")
5 RM5 RM8 RM6
D-DF
TECHNICAL DATAS
www..com www..com
TECHNICAL DATAS
Panel mounting option
For straight and R/A termination
M3 or #4-40 float
3.6 (.141") o3.1 (.122") o2.2 (.086")
3.4 (.134")
Standard rivet f 3.1mm no digit
Float mounting F
Threaded rear insert H/G
M3 or #4-40 front screwlock
M3 or #4-40 removable screwlock
6.2 (.244")
Fixed front female screwlock VF / VFM
Removable female screwlock VF2 / VFM2
Recommended PCB Layout
C F
D size E,A,B,C size
2 x o3,2 (.126")
C L X X o0.9 (.035") 2.74 (.108") for size E,A 2.76 (.109") for size B,C,D
For straight PCB: X = 2.84mm (.112") MIL: X = 2.84mm (.112") For right angle PCB: European: X = 2.54mm (.100"), 2.84mm in option
6
size E
C 0,1 (.004) F 0,05 (.002)
25 (.984) 10.96 (.431)
size A
33.3 (1.311) 19.18 (.755)
size B
47 (1.85) 33.12 (1.304)
size C
63.5 (2.5) 49.68 (1.956)
size D
61.1 (2.406) 44.2 (1.74)
www..com www..com
How to order
...... ... ... ... ... ... ... ...
for specific product grounding tabs: RM5 = for straight PCB mounting* RM8 = for straight PCB mounting + female lock RM6 = for right angle PCB mounting VF = front screwlock 4-40 VFM = front screwlock M3 VF2 = removable screwlock 4-40 VFM2 = removable screwlock M3
17D: yellow chromated shell 0.2m 77D: tinned shell for receptacle (8") 717D: tinned shell + dimples for plug 17DF or 117D: yellow chromated shell 0.5m 77DF or 177D: tinned shell for (20") receptacle 717DF or 777D: tinned shell + dimples for plug 117DF : yellow chromated shell 0.76m 177DF : tinned shell for receptacle (30") 777DF : tinned shell + dimples for plug
termination: -solder cup: no digit -wire wrap: F179 = length 9.6mm F179A = length 13mm -straight PCB: U = length 3.2mm, tail o0.6mm V = length 2.4mm, tail o1.02mm T = length 4mm, tail o0.6mm OL2 = length 5.5mm, tail o0.6mm -right angle connector: MIL footprint without bracket: C = tail o1.02mm A4 = tail o0.6mm plastic bracket: AJ3 = tail o1.02mm AJ4 = tail o0.6mm metal bracket: A = tail o1.02mm AM4 = A = 13.2mm AZ4 = A = 11.5mm AM4B = footprint 14.99mm (.590") European footprint without bracket: 1AON = X = 2.54mm 1BON = X = 2.84mm plastic bracket: 1APN = X = 2.54mm 1BPN = X = 2.84mm 1AUN = X = 2.54mm 1BUN = X = 2.84mm metal bracket: 1AMN = X = 2.54mm 1BMN = X = 2.84mm 1ATN = X = 2.54mm 1BTN = X = 2.84mm
shell size: E,A,B,C, D
mounting options: H = rear insert 4-40 G = rear insert M3 F = float mounting no digit = standard rivet o3.1mm *H, G must also be used to specify the threading of RM5 grounding tabs.
configuration: 09,15,25,37, 50
contact type: P = pin S = socket
: Standard options
7
D-DF
For special request, please consult factory
HOW TO ORDER
www..com www..com
TW
Hybrid D'Sub series
DESCRIPTION APPLICATIONS
The new Amphenol D'Sub TW Hybrid Series permits a mix of contacts including signal, power, shielded, high voltage and fiber optics in the same housing with 18 different contacts arrangements. This new economic series was developed from combination military series, and has improved features: - new contacts - new high temperature black thermoplastic insert - PCB configurations come preloaded with fixed contacts and brackets. These connectors are supplied with screw - machined contacts which are fixed in the insulator. A complete range of housings in also available for cable application.
CONTENTS
Specifications UL file: E64911 - CSA file: LR57744 Connectors according to: MIL C24308 - NFC93425 - HE507 Materials and platings Electrical Data 7.5 A. with 10 A. peaks
Shells Steel - Tin plating or yellow chromate Current rating Signal contacts Insulators High temperature black thermoplastic Power contacts Signal contacts Female: machined bronze
Material Plating finish Or
PCB terminations 10 to 40 A. Male: machined brass Solder cup terminations 10 to 40 A. 16 "Au over 79" Ni min. Crimp terminations 10 to 40 A. 30 "Au over 79" Ni min. Shielded contacts 0.5 A. Shielded contacts Female: machined bronze Voltage rating Material Male: machined brass Signal and power contacts 300 V. R. M. S. at 50 Hz Shielded contacts 150 V. R. M. S. at 50 Hz Plating Inner conductor 16 "Au or 30m Au over 79" Ni Shielded contacts Outer ring 10 "Au over 79" Ni Frequency range 0 - 1 GHz Terminations Tinned Attenuation 0.2 dB Except solder cup and crimp terminations gold flash V.S.W.R. 1.4 (+ 0.04/GHz) Characteristic impedance 50 Ohms Power contacts Female: machined bronze Material Male: machined brass Dielectric withstanding 1000 V.R.M.S. at 50Hz voltage Plating Contacts 16 "Au or 30" Au over 79" Ni Insulation resistance 5000 M Ohms at 500 VDC Terminations Tinned 5m Ohms Except solder cup and crimp terminations gold flash Contact resistance 1m Ohm Brackets Steel - Tin plating or yellow chromate Shell resistance
Front jackscrews Brass - Tin plating or yellow chromate Rear clinch nuts Brass - Tin plating or yellow chromate Boardlocks Bronze - Tin plating Stand - off Brass - Tin plating
(electrical grounding)
Climatic Data Operating temperature - 55C + 155C (with peaks up to 180C) Damp heat 56 days (40C - 95% HR) Salt spray 48 hours
Mechanical data Shells With or without dimples Contact retention force in dielectric material > 40N Maximum mating and unmating force With dimples E size = 70 N A size = 80 N B size = 100 N C size = 150 N D size = 180 N Without dimples E size = 30 N A size = 50 N B size = 80 N C size = 120 N D size = 160 N Compatible with process IR - Air convectioned 260 for 20 s. Resistance to solder iron heat 260 C for 30 s. Mating cycles 200 (classe II) or 500 (classe I) Blind mating system Available upon request Polarization Available with locking accessories Consult factory
A full range of arrangements compatible with reflow process
* * * *
Industrial Telecom Any application requiring optimization of space
E 200/A
TW
Military
www..com www..com
TECHNICAL DATAS
Shells and contacts plating
CLASS II
0.4m (16``) Au contacts gold plating 200 mating cycles
CLASS I
0.76m (30``) Au contacts gold plating 500 mating cycles
Types 17 TW 77 TW 717 TW
Shells and plating Yellow chromated shell
Male and female
Types 117 TW 177 TW 777 TW
Shells and plating Yellow chromated shell
Male and female
Tin plated shell
Male and female
Tin plated shell
Male and female
Tin plated shell with dimples
Male only
NOTE: Tin plated shells standard
Tin plated shell with dimples
Male only
NOTE: Tin plated shells standard
Housing arrangements
Male front view
Arrangement Shell size
E
A
A
Arrangement Shell size
A
B
B
Arrangement Shell size
B
B
B
Arrangement Shell size
C
C
C
Arrangement Shell size
C
C
C
Arrangement Shell size
D
D
D
2
www..com www..com
Shell size dimensions
Shell size
Contact
P: Pin S: Socket
A
0.25 (.010)
B
0/-0.20 (0/-.008)
B'
+0.20/0 (+.008/0)
C
0.10 (.004)
D
0/-0.25 (0/-.010)
D'
+0.25/0 (+.010/0)
E
0.20 (.008)
F
F' 10.9 (.429")
G
G'
0.10 (.004)
H
J
+0.05/-0.20 +0.10/-0.20 +0.10/-0.20 (+.002/-.008) (+.004/-.008) (+.004/-.008)
+0.10/-0.40 0/-0.50 (+.004/-.016) (0/-.020)
P E S P A S P B S P C S P D S
30.7 (1.209")
16.8 (.661") 16.4 (.646") 25.1 (.988") 24.8 (.976")
25.0 (.984")
8.2 (.323") 8.0 (.315") 8.2 (.323") 8.0 (.315") 8.2 (.323") 8.0 (.315") 8.2 (.323") 8.0 (.315") 11.0 (.433") 10.9 (.429")
12.4 (.488")
5.9 (.232") 6.2 (.244")
11.1 (.437") 10.9 (.429") 11.1 (.437") 11.0 (.433") 11.1 (.437") 11.0 (.433") 11.1 (.437") 11.0 (.433") 11.1 (.437")
19.4 11.0 (.764") (.433")
39.0 (1.535")
33.3 (1.311")
12.4 (.488")
5.9 (.232") 6.2 (.244") 5.8 (.228") 6.2 (.244") 5.8 (.228") 6.2 (.244") 5.8 (.228") 6.2 (.244")
27.7 11.0 (1.091") (.433")
52.9 (2.083")
38.5 (1.513")
38.8 (1.528") 47.0 (1.850") 55.3 (2.177") 63.5 (2.500") 52.7 (2.075") 61.1 (2.406")
12.4 (.488")
41.4 11.0 (1.630") (.433")
69.2 (2.724")
54.9 (2.161")
12.4 (.488")
57.9 11.0 (2.280") (.433")
66.8 (2.630")
52.5 (2.067")
15.2 (.598")
55.5 13.8 (2.185") (.543")
Panel cutouts
Optimal cutout for rear mounting Standard cutout
A B oG 10 GH B
A 10 F E
D C
Shell size Mounting method Front E Rear Front A Rear Front B Rear A
0.20 (.008)
Rd Rading J
B
0.20 (.008)
R
D C
E F
0.20 (.008)
Rd Rading J
H
0.20 (.008)
C
0.20 (.008)
D
0.20 (.008)
G
0.20 (.008)
J
0.20 (.008)
0.20 (.008)
22.2 (.874") 20.5 (.807") 30.5 (1.201") 28.8 (1.134") 44.3 (1.744") 42.5 (1.673") 60.7 (2.390") 59.1 (2.327") 58.3 (2.295") 56.3 (2.217")
11.1 (.437") 10.2 (.402") 15.3 (.602") 14.4 (.567") 22.1 (.870") 21.3 (.839") 30.4 (1.197") 29.5 (1.161") 29.2 (1.150") 28.2 (1.110")
25.0 (.984")
12.5 (.492")
13.0 (.512") 11.4 (.449") 13.0 (.512") 11.4 (.449") 13.0 (.512") 11.4 (.449") 13.0 (.512") 11.4 (.449") 15.8 (.622") 14.1 (.555")
6.5 (.256") 5.7 (.224") 6.5 (.256") 5.7 (.224") 6.5 (.256") 5.7 (.224") 6.5 (.256") 5.7 (.224") 7.9 (.311") 7.1 (.280")
3.0 (.118")
1.5 (.059")
2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134") 2.1 (.083") 3.4 (.0134")
47.0 (1.850")
23.5 (.925")
3.0 (.118")
1.5 (.059")
3
Front C Rear Front D Rear
63,5 (2.500")
31,7 (1.248")
3.0 (.118")
1.5 (.059")
61.1 (2.406")
30.6 (1.205")
3.0 (.118")
1.5 (.059")
TW
33.3 (1.311")
16.7 (.657")
3.0 (.118")
1.5 (.059")
TECHNICAL DATAS
www..com www..com
TECHNICAL DATAS
Straight connector footprint
Signal tail 0.6 mm Dia. (.0236") 1.6 mm (.063")PCB For other PCB thickness: consult factory.
Description a Power (.126" tail dia.) Power (.0787" tail dia.) Shielded Signal
1 1 3 2
Dimensions
b 7.2 mm (.283") 7.2 mm (.283") 7.2 mm (.283") 11.50 mm (.453") 4.50 mm (.177") 4.50 mm (.177") 4.00 mm (.157") 5.00 mm (.196")
Straight contact combinations
Arrangement with signal contacts Arrangement without signal contacts 3W3 - 5W5 - 8W8
See above dimensions
Size 8 and 20 Contacts
See above dimensions
Size 8 Contacts
P 3SY Power 3.2 mm DIA. (.126") (20 to 40 A) and signal Power 2 mm DIA. (.0787") (10 to 20 A) and signal P 2Y CSY SY No reference Shielded and signal Signal only Signal (Size 20) with solder cup terminations
Housing preloaded with contacts
P 3Y Power only 3.2 mm DIA. (.126") (20 to 40 A) Power only 2 mm DIA. (.0787") (10 to 20 A) 4 CY Shielded only
P 2SY
www..com www..com
Right angle connector footprint
Signal tail 0.6 mm Dia. (.0236") 1.6 mm (.063") PCB For other PCB thickness: consult factory.
Europe
HE 5 pattern = - Europ. height - Europ. footprint
pitch between 2 rows: .100"
Mix
Mixed pattern = - MIL height - Europ. footprint
pitch between 2 rows: .100"
MIL
MIL pattern = - MIL height - MIL footprint
pitch between 2 rows: .112"
Description Power (.0787" tail dia.) Power (.126" tail dia.) Shielded Signal
a
b
c
a
b
c
a
b
c
1 (.456") (.283") (.413") (.456") (.248") (.374") (.375") (.248") (.374") 1 (.845") (.283") (.413") (.845") (.248") (.374") (.845") (.248") (.374") 2
11.57mm 7.20mm 10.50mm 11.57mm 6.30mm 9.50mm 9.52mm 6.30mm 9.50mm 21.46mm 7.20mm 10.50mm 21.46mm 6.30mm 9.50mm 21.46mm 6.30mm 9.50mm 10.30mm 6.30mm 10.00mm 10.30mm 6.30mm 10.00mm (.406") (.248") (.394") (.406") (.248") (.394")
-
-
-
3 (.406") (.283") (.441") (.406") (.248") (.374") (.319") (.248") (.374")
10.30mm 7.20mm 11.20mm 10.30mm 6.30mm 9.50mm 8.10mm 6.30mm 9.50mm
Note: above dimensions correpond to sizes E to C. Consult factory for D sizes.
Connector comes equiped with contacts and brackets.
Right angle contacts combinations
Arrangements with signal contacts Arrangement without signal contacts 3W3 - 5W5 - 8W8
European footprint
Mixed footprint
MIL (U.S.) footprint
Size 8 and 20 contacts
European footprint
Mixed footprint
MIL (U.S.) footprint
Size 8 contacts only
EP3SV
HP3SV
MP3SV
Power 3.2 mm DIA. (.126") (20 to 40 A) and signal Power 2 mm DIA. (.0787") (10 to 20 A) and signal Shielded and signal Signal only
EP3V
HP3V
MP3V
Power only 3.2 mm DIA. (.126") (20 to 40 A) Power only 3.2 mm DIA. (.126") (10 to 20 A) Shielded only
5
EP2SV
HP2SV
MP2SV
EP2V
HP2V
MP2V
ESV
HCSV HSV
MCSV MSV
-
HCV
MCV
TW
TECHNICAL DATAS

www..com www..com
TECHNICAL DATAS
Mounting options
Right angle version Connectors come equiped with metal brackets
BLANK: 3,10 (.122") dia mounting hole RM6: metal brackets + boardlock
Metal bracket RM6
Straight version
BLANK: 3,10 (.122") dia mounting hole RM54: RM5 4.40 threaded RM53: RM5 M3 threaded
7.2 (.283)
(.059 max.)
1.5 max.
RM5 RM8
RM84: RM8 4.40 threaded RM83: RM8 M3 threaded
A514: blind mating system
3.5 (.137)
FM: float mounting system
O 2.2 (.086) 3.6 max. (.141 max.)
+ 0.25 0
(.118)
O3
19.9 (.783)
Straight and right angle version
4R: 4.40 rear nut 3R: M3 rear nut 4F: 4.40 front female screwlock 3F: M3 front female screwlock
O 2.25 (.088)
4 3.
(.1
3
4)
7.1 ) 79 (.2
6
www..com www..com
High power contacts
.189" .189"
.205"
Solder cup version
P/N Plug
17DM 53745-8 17DM 53745-7 17DM 53745-1
Trim dimensions: 7.5 mm (.295")
Current Socket
17DM 53744-7 17DM 53744-6 17DM 53744-1
.205"
Dimensions A mm (inch) B mm (inch) 1.80 (.071") 2.80 (.110") 4.80 (.189") 2.55 (.100") 3.70 (.145") 5.60 (.220")
10 to 20 Amp. 20 to 30 Amp. 30 to 40 Amp.
Crimp version
P/N Plug
17DM 53745-208 17DM 53745-207 17DM 53745-201
Trim dimensions: 7.5 mm (.295")
Current Socket
17DM 53744-207 17DM 53744-206 17DM 53744-201
Dimensions A mm (inch) B mm (inch) 1.80 (.071") 2.80 (.110") 4.80 (.189") 2.55 (.100") 3.70 (.145") 5.60 (.220")
10 to 20 Amp. 20 to 30 Amp. 30 to 40 Amp.
Crimping tool for all sizes 17D479SP
Extraction tool for sizes 8 cts 17D429SP
7
TW
TECHNICAL DATAS
www..com www..com
TECHNICAL DATAS
Straight shielded contacts
Crimp ferrule/Inner solder
Type plug plug plug plug socket socket socket socket
P/N 17DM 53740 17DM 53740-1 17DM 53740-3 17DM 53740-5 17DM 53742 17DM 53742-1 17DM 53742-3 17DM 53742-5
Dimensions (inch) A Max B D
18.8 (.740") 23.6 (.929") 1.0 (.039") 18.8 (.740") 23.6 (.929") 1.7 (.066") 21.5 (.846") 23.6 (.929") 2.8 (.110") 21.5 (.846") 23.6 (.929") 3.2 (.126") 18.8 (.740") 23.6 (.929") 1.0 (.039") 18.8 (.740") 23.6 (.929") 1.7 (.066") 21.5 (.846") 23.6 (.929") 2.8 (.110") 21.5 (.846") 23.6 (.929") 3.2 (.126")
Cable - RG
178 B/U 179 B/U 316 B/U 180 B/U 58 C/U 178 B/U 179 B/U 316 B/U 180 B/U 58 C/U
Trim dimensions (inch) E F G
7.9 (.311") 7.9 (.311") 9.5 (.374") 9.5 (.374") 7.9 (.311") 7.9 (.311") 9.5 (.374") 9.5 (.374") 6.3 (.248") 6.3 (.248") 7.9 (.311") 7.9 (.311") 6.3 (.248") 6.3 (.248") 7.9 (.311") 7.9 (.311") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078")
Ferrule and inner solder
Type short plug plug plug plug plug short socket socket socket socket socket
P/N 17DM 53740-5000 17DM 53740-5001 17DM 53740-5002 17DM 53740-5005 17DM 53740-5008 17DM 53742-5000 17DM 53742-5001 17DM 53742-5002 17DM 53742-5004 17DM 53742-5006
Dimensions (inch) A Max B D
17.0 (.669") 21.8 (.858") 1.0 (.039") 18.8 (.740") 23.6 (.929") 1.7 (.066") 21.5 (.846") 26.3 (1.035") 2.8 (.110") 21.5 (.846") 26.3 (1.035") 3.2 (.126") 18.8 (.740") 23.6 (.929") 1.0 (.039") 17.0 (.669") 21.8 (.858") 1.0 (.039") 18.8 (.740") 23.6 (.929") 1.7 (.066") 21.5 (.846") 26.3 (1.035") 2.8 (.110") 21.5 (.846") 26.3 (1.035") 3.2 (.126") 18.8 (.740") 23.6 (929") 1.0 (.039")
Cable - RG
178 B/U 179 B/U 316 B/U 180 B/U 58 C/U 178 B/U 178 B/U 179 B/U 316 B/U 180 B/U 58 C/U 178 B/U
Trim dimensions (inch) E F G
7.9 (.311") 7.9 (.311") 9.5 (.374") 9.5 (.374") 7.9 (.311") 7.9 (.311") 7.9 (.311") 9.5 (.374") 9.5 (.374") 7.9 (.311") 6.3 (.248") 6.3 (.248") 7.9 (.311") 7.9 (.311") 6.3 (.248") 6.3 (.248") 6.3 (.248") 7.9 (.311") 7.9 (.311") 6.3 (.248") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078") 2 (.078")
8
www..com www..com
Right angled shielded contact
Crimp ferrule/Inner solder
Type plug plug plug plug socket socket socket socket
P/N A Max 17DM 53741 17DM 53741-1 17DM 53741-3 17DM 53741-4 17DM 53743-2 17DM 53743-3 17DM 53743-5 17DM 53743-6
Dimensions (inch) B C
Cable - RG D
178 B/U 180 B/U 58 C/U 178 B/U 180 B/U 58 C/U
Trim dimensions (inch) E F G
9.5 (.374") 5.9 (.232") 1.6 (.062")
13.5 (.531") 18.6 (.732") 12.5 (.492") 1.0 (.039") 13.5 (.531") 18.6 (.732") 12.5 (.492") 1.7 (.066") 13.5 (.531") 18.6 (.732") 15.3 (.602") 2.8 (.110") 13.5 (.531") 18.6 (.732") 15.3 (.602") 3.2 (.126") 13.5 (.531") 18.6 (.732") 12.5 (.492") 1.0 (.039") 13.5 (.531") 18.6 (.732") 12.5 (.492") 1.7 (.066") 13.5 (.531") 18.6 (.732") 15.3 (.602") 2.8 (.110") 13.5 (.531") 18.6 (.732") 15.3 (.602") 3.2 (.126")
179 B/U 316 B/U 9.5 (.374") 5.9 (.232") 1.6 (.062")
10.7 (.421") 7.9 (.311") 2.4 (.094") 10.7 (.421") 7.9 (.311") 2.4 (.094") 9.5 (.374") 5.9 (.232") 1.6 (.062")
179 B/U 316 B/U 9.5 (.374") 5.9 (.232") 1.6 (.062")
10.7 (.421") 7.9 (.311") 2.4 (.094") 10.7 (.421") 7.9 (.311") 2.4 (.094")
Ferrule and inner solder
Type plug plug plug plug socket socket socket socket
P/N A Max 17DM 53741-5000 17DM 53741-5001 17DM 53741-5003 17DM 53741-5004 17DM 53743-5000 17DM 53743-5001 17DM 53743-5003 17DM 53743-5004
Dimensions (inch) B C
Cable - RG D
178 B/U 180 B/U 58 C/U 178 B/U 180 B/U 58 C/U
Trim dimensions (inch) E F G
9.5 (.374") 5.9 (.232") 1.6 (.062")
13.5 (.531") 18.6 (.732") 12.5 (.492") 1.0 (.039") 13.5 (.531") 18.6 (.732") 12.5 (.492") 1.7 (.066") 13.5 (.531") 18.6 (.732") 13.9 (.547") 2.8 (.110") 13.5 (.531") 18.6 (.732") 13.9 (.547") 3.2 (.126") 13.5 (.531") 18.6 (.732") 12.5 (.492") 1.0 (.039") 13.5 (.531") 18.6 (.732") 12.5 (.492") 1.7 (.066") 13.5 (.531") 18.6 (.732") 13.9 (.547") 2.8 (.110") 13.5 (.531") 18.6 (.732") 13.9 (.547") 3.2 (.126")
179 B/U 316 B/U 9.5 (.374") 5.9 (.232") 1.6 (.062")
10.7 (.421") 7.9 (.311") 2.4 (.094") 10.7 (.421") 7.9 (.311") 2.4 (.094") 9.5 (.374") 5.9 (.232") 1.6 (.062")
179 B/U 316 B/U 9.5 (.374") 5.9 (.232") 1.6 (.062")
10.7 (.421") 7.9 (.311") 2.4 (.094") 10.7 (.421") 7.9 (.311") 2.4 (.094")
Crimping tool
Hand crimp tool 227-0944 (without dies) (M 22 520/5-01)
RG cables RG 58 C/U RG 178 B/U RG 179 B/U RG 180 B/U
MIL reference M 22 520/5-05 M 22 520/5-03 M 22 520/5-03 M 22 520/5-05
Amphenol P/N 227 1221-05 227 1221-03 227 1221-03 227 1221-05
dim. between 2 flat surface cavity A cavity B 5.41 - - 2.67 3.25 - - 4.52
9
Extraction tool
Crimping tool for all sizes Amphenol ref: 227-0994 - MIL ref: M22520/5-01 Extraction tool for sizes 8 cts 17D429SP
TW
TECHNICAL DATAS
www..com www..com
ASSEMBLY INSTRUCTIONS
Cabling instructions for shielded contacts
Straight crimp shielded contacts: inner solder contact outer crimp contact
Right angle crimp shielded contacts: inner solder contact outer crimp contact
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable according to the recommended dimensions. - Insert the cable dielectric and the center conductor inside the inner sleeve. - Solder the central conductor to the shielded center contacts. - Slide the outer ring towards the inner sleeve ans recover the braid. - Using crimp hand tool equipped with the appropriate dies, crimp in the area defined.
Solder straight shielded contacts
Solder right angle shielded contacts
Assembly method
- Slide the outer ring over the cable jacket. Trim the cable according to the recommended dimensions. - Insert the cable dielectric and the center conductor inside the inner sleeve. - Solder the central conductor to the shielded center contacts. - Slide the outer ring towards the inner sleeve ans recover the braid. - Solder by introducing metal through the outer ring hole.
10
www..com www..com
How to build your part number
..... TW
..... / ..... / .....
..........
..........
..........
1
Shell + contacts Series plating Size
2
Type: Configu- P = male rations S = fem.
3
Contact combinations
4
Panel Mounting
5
PCB Mounting
6
Specials
Page 2 17 77 717 117 177 777 TW TW TW TW TW TW E A A A B B B B B C C C C C C D D D
Page 2 5W1 3W3 7W2 11W1 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21WA4 25W3 27W2 24W7 36W4 43W2 P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S P/S
Page 4/5 XP3SV XP2SV XP2V XP3V P2Y P3Y XCSV XHCV CY XSV SY P3SY P2SY CSY
Page 6 4F 4R 3F 3R A514
Page 6 RM6 RM53 RM54 RM83 RM84 Consult factory
11
Consult factory for D size configurations
TW
Blank: solder cup signal contacts size 20 only
HOW TO ORDER
www..com www..com
HT
D-Sub connectors - Stamped and Formed Contacts
STRAIGHT PCB TERMINATION HIGH TEMPERATURE CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Specifications
* Connectors according to MIL C24308 Materials and platings Shells Insulator Contacts Boardlock Screwlock Steel with nickel plating Glass-filled thermoplastic, UL 94V-0 Copper alloy, selective gold plating Brass with nickel plating Brass with nickel plating
The Amphenol "HT" series allow the customers to use through holes connectors with reflow soldering process. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 600V AC/rms 50Hz 1000V AC/rms 50Hz for one minute 5000M 10m max
Climatic Data Operating temperature -55C to +150C, resist to short term (30s) at 260C
Economical straight PCB, high temperature connectors
Mechanical Data Mating and unmating force Unit: kg ( lb)
No. of Cts 9 15 25 37 Mate (max) 3.05 5.09 8.44 12.51 (6.74) (11.24) (18.66) (27.65) Unmate (min) 0.36 0.46 0.81 1.1 (0.79) (1.01) (1.8) (2.47)
* Industrial * Telecom * Any industry standard
I / O connections
Standard plating thicknesses
E250/A
HT
* gold flash * 0.76m (30") gold
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
8.38 0.13 (.33 .005)
A0.38 (.015) B0.13 (.005) C0.13 (.005) D0.13 (.005) POSITION #1 7.90.13 (.311.005)
2.84 (.112)
10
2.77 (.109) 3.18 (.125) 4.8 (.189)
6.1 (.240)
PLUG
SOCKET
12.550.38 (.494.015)
7.7 (.303)
0.8 (.031) *see chart "how to order"
Recommanded P.C.B. Layout RECOMMENDED P.C.B. LAYOUT
B E o3.2 (.126) C L 1.42 (.560)
o1.19 (.47)
1.385 (.055) 2.77 (.109)
Nb OF CONTACTS 9 15 25 37
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.34 (2.73)
DIMENSIONS mm (inch) B C
24.99 (.984) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 16.92 (.666) 25.25 (.994) 38.96 (1.53) 55.42 (2.18)
D
16.26 (.640) 24.56 (.967) 38.30 (1.51) 54.76 (2.16)
E
11.08 (.436) 19.39 (.763) 33.24 (1.31) 49.86 (1.96)
www..com www..com
Panel mounting option
#4-40 #4-40
o3.25 (.128)
Standoff boardlock RM5
o3.25 (.128)
Standoff boardlock RM8
How to order
17 HT
N
...
...
... ...
...
...
standard density
packaging: C = carton boxes T = plastic tubes
shell size: E (9 ways) A (15 ways) B (25 ways) C (37 ways)
contact plating: 1 = gold flash 4 = 0.76m (30")
contact type: P = pin S = socket
grounding tabs: RM5 = retention clip RM8 = retention clip +front screwlock
For special request, please consult factory
HT
termination: OL2: L = 6.02mm (.237") OL2C: L = 11.48mm (.452") OL2E: L = 11.95mm (.470")
5.6 (.220)
HOW TO ORDER
www..com www..com
HT
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE HIGH TEMPERATURE CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Specifications
* Connectors according to MIL C24308 Materials and platings Shells Insulator Contacts Rear insert Screwlock Grounding clip Steel with nickel plating Glass-filled thermoplastic, UL 94V-0 Copper alloy, selective gold plating Brass with nickel plating Brass with nickel plating Copper alloy with tin-lead plating Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 600V AC/rms 50Hz 1000V AC/rms 50Hz for one minute 5000M 10m max
The Amphenol "HT" series allow the customers to use through holes connectors with reflow soldering process. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements
Climatic Data Operating temperature -55C to +150C, resist to short term (30s) at 260C
Economical right angle PCB, high temperature connectors
Mechanical Data Mating and unmating force Unit: kg ( lb)
No. of Cts 9 15 25 37 Mate (max) 3.05 5.09 8.44 12.51 (6.74) (11.24) (18.66) (27.65) Unmate (min) 0.36 0.46 0.81 1.1 (0.79) (1.01) (1.8) (2.47)
* Industrial * Telecom * Any industry standard
I / O connections
Standard plating thicknesses
E251/A
HT
* gold flash * 0.76 m (30") gold
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
8.380.13 (.33.005)
B0.13 (.005) C0.13 (.005) 10 2.84 (.112) D0.13 (.005) E0.05 (.002) POSITION #1 POSITION #1 7.90.13 (.31.005) 2.80.4 (.11.016)
F0.1 (.004)
12.550.38 (.49.015)
A0.38 (.015)
6.3 (.248) 6.1 9.5 (.374) (.240)
PLUG
18.3 (.720)
SOCKET
18.5 (.728)
5.9 (.232)
2.84 (.112)
8.08 (.318)
3.2 (.126)
Nb OF CONTACTS 9 15 25 37
A
30.81 (1.21) 39.14 (1.54) 53.04 (2.09) 69.32 (2.73)
DIMENSIONS mm (inch) B C D
24.99 (.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 16.92 (.67) 25.25 (.99) 38.96 (1.53) 55.42 (2.18) 16.24 (.64) 24.56 (.97) 38.38 (1.51) 54.76 (2.16)
E
11.09 (.44) 19.39 (.76) 33.24 (1.31) 49.86 (1.96)
F
2.74 (.108) 2.74 (.108) 2.77 (.109) 2.77 (.109)
Recommanded P.C.B. Layout RECOMMENDED P.C.B. LAYOUT
B0.05 (.002) 1.42 (.056) E0.05 (.002) POSITION #1 F0.1 (.004)
1.42
2 o3.2 (.126)
o1 (.039)
www..com www..com
Panel mounting option
#4-40 screwlock
4.8 (.189")
#4-40
Front female screwlock 4F
Threaded rear insert 4R
How to order
17 HT
N
...
...
... ...
...
...
standard density
options: O = open back side no digit = closed back side
shell size: E (9 ways) A (15 ways) B (25 ways) C (37 ways)
packaging: C = carton boxes T = plastic tubes
contact type: P = pin S = socket
contact plating: 1 = gold flash 4 = 0.76m (30")
mounting options: 4R = rear insert 4-40 4F = front screwlock 4-40
For special request, please consult factory
HT
HOW TO ORDER
www..com www..com
HT
D-Sub connectors - Stamped and Formed Contacts
RIGHT ANGLE HIGH TEMPERATURE CONNECTORS FOOTPRINT 14.99mm (.590")
MAIN CHARACTERISTICS DESCRIPTION APPLICATIONS Specifications
* Connectors according to MIL C24308 Materials and platings Shells Insulator Contacts Rear insert Screwlock Grounding clip Steel with nickel plating Glass-filled thermoplastic, UL 94V-0 Copper alloy, selective gold plating Brass with nickel plating Brass with nickel plating Copper alloy with tin-lead plating Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 600V AC/rms 50Hz 1000V AC/rms 50Hz for one minute 5000M 10m max
The Amphenol "HT" series allow the customers to use through holes connectors with reflow soldering process. This series gives you Amphenol's high standards of quality and reliability to meet all of your commercial requirements
Climatic Data Operating temperature -55C to +150C, resist to short term (30s) at 260C
Economical right angle PCB high temperature connectors
Mechanical Data Mating and unmating force Unit: kg ( lb)
No. of Cts 9 15 25 37 Mate (max) 3.05 5.09 8.44 12.51 (6.74) (11.24) (18.66) (27.65) Unmate (min) 0.36 0.46 0.81 1.1 (0.79) (1.01) (1.8) (2.47)
* Industrial * Telecom * Any industry standard
I / O connections
Standard plating thicknesses
E252/A
HT
* gold flash * 0.76 m (30") gold
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
A0.38 (.015) B0.13 (.005) C0.25 (.01) D0.25 (.01) POSITION #1
8.38 (.330)
2.84 (.112)
10
2.77 (.109)
6.1 (.240)
0.64 0.64 (.025 .025)
7.9 (.311)
12.55 (.494)
8 (.315)
2.84 (.112)
14.99 (.590)
3.18 (.125)
Recommanded P.C.B. Layout
2.84 (.112)
E0.13 (.005) C L
o1.19 (.047)
2 o3.05 (.120) 1.385 (.054) 6.99 (.275) 2.77 (.109) B0.13 (.005)
DIMENSIONS mm (inch) A
9 15 25 37 30.84 (1.214)
B
24.99 (.984)
C
16.92 (.666) 25.25 (.994)
D
16.26 (.640) 24.56 (.967)
E
11.08 (.436) 19.39 (.763) 33.24 (1.309
39.24 (1.545) 33.32 (1.312)
53.04 (2.088) 47.04 (1.852) 38.96 (1.534) 38.30 (1.508)
69.34 (2.730) 63.50 (2.500) 55.42 (2.182) 54.76 (2.156) 49.86 (1.963)
25.08 (.987)
12.1 (.476)
www..com www..com
Panel mounting option
#4-40 screwlock
4.8 (.189)
#4-40
Front female screwlock 4F
Threaded rear insert 4R
How to order
17 HT
N ... ... AB
... ... ... ...
standard density
options: O = open back side no digit = closed back side
shell size: E (9 ways) A (15 ways) B (25 ways) C (37 ways)
packaging: C = carton boxes T = plastic tubes
contact type: P = pin S = socket
contact plating: 1 = gold flash 4 = 0.76m (30")
footprint: 14.99mm ( .590")
mounting options: 4R = rear insert 4-40 4F = front screwlock 4-40
For special request, please consult factory
HT
HOW TO ORDER
www..com www..com
17H
D-Sub connectors - Stamped and Formed Contacts
DUAL PORT D-SUB CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Specifications
* UL File: E149426 * Connectors according to MIL C24308 Materials and platings Shells Insulator Pin contacts Steel, tin plated Glass-filled thermoplastic, UL 94V-0 Brass, selected gold in mating area; 2.54m (100") min. tin lead on termination area over 1.27m (50") min. nickel Phosphor bronze, selected gold in mating area; 2.54m (100") min. tin lead on termination area over 1.27m (50") min. nickel Brass, 2.54m (100") min. nickel plated Phosphor bronze, 2.54m (100") min. tin lead plated Brass, 2.54m (100") min. nickel plated
Amphenol's 17H dual port connectors are a state of the art design. The front metal shell helps reduce EMI / RFI emissions. Designed to save PC board space, Amphenol 's dual port provides two I / O connectors in a minimal amount of board space.
Socket contact
Rear insert Boardlock Screwlock
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 3A 250V AC/rms 60Hz 1000V AC/rms 60Hz for one minute 1000M 20m max Climatic Data Operating temperature Salt spray -55C to +125C 24 hours
Economical dual port connectors
* Industrial * Telecom * Any industry standard
I / O connections
Mechanical Data Single contact insertion force Single contact withdrawal force Mating and unmating force Unit: kg ( lb)
No. of Cts 9 15 25 15 (Hi-den)
Mate (max) 3.05 5.09 8.44 3.81 (6.74) (11.24) (18.66) (8.42)
Unmate (min) 0.36 0.46 0.81 0.52 (0.79) (1.01) (1.8) (1.14)
Standard plating thicknesses
* gold flash * 0.4m (15") gold * 0.76 m (30") gold
E13/B
17H / E13
0.54kg (1.19lb) max 0.06kg (0.13lb) min
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
16.08 (.633)
8.380.38 (.330.015)
7.90.13 (.311.015)
E0.05 (.002)
12.550.38 (.494.015)
A0.38 (.015) B0.13 (.005) C0.13 (.005) D0.13 (.005)
25.7 (1.01)
5.9 (.232)
8 (.315)
6.1 (.240)
25.5 (1)
POSITION #1
8.08 (.318.01) 10 2.77 (.109) 2.84 (.112)
3.81 (.150) 2.84 (.112)
* spacing between ports (see "how to order" for dimensions) ** profile distance (see "how to order" for dimensions)
Recommanded P.C.B. Layout
o3.05 (.120) 2.84 (.112) B0.13 (.005) 1.27 (.050) E0.05 (.002) 2.77 (.109) 8.08 (.318)
3.81 (.150)
2.84 (.112)
only for quad boardlock
o1.02 (.040)
Nb OF CONTACTS 9 15 25 37 15 (Hi-den)
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73) 30.84 (1.21)
DIMENSIONS mm (inch) B C
24.99 (.984) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 24.99 (.984) 16.92 (.666) 24.7 (.972) 38.96 (1.53) 55.42 (2.18) 16.92 (.666)
D
16.24 (.639) 24.56 (.967) 38.38 (1.51) 54.76 (2.16) 16.24 (.639)
8 (.315)
E
11.09 (.437) 19.39 (.763) 33.24 (1.31) 49.86 (1.96) 10.31 (.406)
3.30.13 (.130.005)
2.84 (.112)
G**
F*
www..com www..com
Panel mounting option
Flange mounting options:
#4-40 front screwlock M3 or #4-40
5.8 (.228")
Threaded rear insert 0/4 Fixed front female screwlock 7
M3 or #4-40 removable screwlock
4.8 (.189")
Removable female screwlock 1/5
Board mounting options:
#4-40
boardlock
Threaded hole 1 Dual arrowhead boardlock 2
boardlocks
Quad arrowhead boardlock 3
17H / E13
TECHNICAL DATAS
www..com www..com
HOW TO ORDER
How to order
17H
...
...
...
... ...
...
...
front shell finish: 0 = zinc chromated 1 = tin-lead over nickel 2 = nickel
bottom connector type: 1 = 9-pos. male 2 = 9-pos. female 3 = 15-pos. male 4 = 15-pos. female 5 = 25-pos. male 6 = 25-pos. female D = 37-pos. male E = 37-pos. female 7 = 15-pos. high density female
contact finish: 0 = flash gold 1 = 0.4m (15") gold 2 = 0.76m (30") gold 3 = full flash gold
: Standard options
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol
Amphenol Socapex
Telecom Business Unit 21, chemin du Defois - BP 349 F - 39100 Dole Fax: +33 (0) 3 84 82 94 11
http://www.dsubconnector.com
Technical support Tel.: +33 (0) 3 84 82 94 00
E13/B
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
top connector type: 1 = 9-pos. male 2 = 9-pos. female 3 = 15-pos. male 4 = 15-pos. female 5 = 25-pos. male 6 = 25-pos. female D = 37-pos. male E = 37-pos. female 7 = 15-pos. high density female
board mounting options: 1 = 4*threaded hole 4-40 2 = dual arrowhead boardlock 3 = quad arrowhead boardlock
Mediasquare +33 (0) 1 46 31 36 36
spacing between ports: 1: F=15.88mm (.625"), G=28.42mm (1.12") 2: F=19.05mm (.750"), G=31.60mm (1.24") 3: F=22.86mm (.900"), G=35.41mm (1.39") for F and G, see enclosed drawing
flange mounting options: 0 = rear insert 4-40 1 = removable screwlock 4-40 4 = rear insert M3 5 = removable screwlock M3 7 = fixed screwlock 4-40
www..com www..com
SM2
D'Sub connectors - Stamped and Formed Contacts
SURFACE MOUNT CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Specifications
* UL File: E64911 * Connectors according to: MIL C24308 - NFC 93425-HE5 Materials and platings Shells Insulator Socket contact Steel with tin plating High temperature ( peack at 260C ) glass-filled thermoplastic, UL 94V- 0 Stamped and formed brass, selected gold in mating area ; 2.54m (100") min. tin-lead on termination area, with entire contact under-plated 1.27m (50") min. nickel Brass, 3m up to 5m (118" up to 197") tinned over nickel 2m up to 3m (78" to 118") Tin-lead plating 4m up to 6m (157" up to 236") over nickel 2m up to 3m (78" up to 118"), insertion force: Low Insertion Force = LIF (bronze) Zero Insertion Force = ZeFo (brass) Brass, 6m up to 10m (236" up to 394") tinned over nickel 2m up to 3m (78" up to 118") Grounding strap: brass, 4m up to 6m tin-lead plating over nickel 2m up to 3m (78" up to 118") Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 3A 300V AC/ rms 50Hz 1000V AC/ rms 50Hz for one minute 5000M 10 m max Climatic Data Operating temperature Damp heat 85C, peak at 105C 56 days (105F - 95% HR) Mechanical Data Single contact insertion force Single contact withdrawal force LIF boardloc Coplanarity of cts Mating and unmating force Unit: N
No. of Cts 9 (size E) 15 (size A) 25 (size B) Mate (max) 30 50 83 Unmate (min) 3.5 4.5 8.0
The new Amphenol SMT D-Sub is offered in right angle, receptacle with brackets, as an industry standard for I / O connections. New boardlock features: -LIF (Low Insertion Force) boardlock especially designed to be fully compatible with pick and place machine. -ZeFo (Zero Force Insertion) boardlock has been designed so that once placed and expanded, secures a safe locking.
Rear insert
Boardlock
Screwlock
Grounding
Designed for Pick and Place SMT process
* Industrial * Telecom * Any industry standard
I / O connections
1.2N < F < 2.5N 0.4N min 8N max per connector 0.2mm (.008") max
E230/A
SM2
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
12.4 0.2 (.4880.008)
A C B 2.84 (.112) 0.5 (.020) F 3.6 (.142) 4.95 (.195) K
6.4 (.252) 6.3 (.248)
12.7 (.500)
see panel mounting options 3.4 (.134)
D
Pitch
9.62 (.379)
PCB LAYOUT
C 1 (.039) O 3.3 (.130) 6.0 9.6 (.378) 9.7 (.382) F
1.9 (.075) 0.94 (.037) 1/2 Pitch Pitch
SHELL SIZE E A B
A
+0.05 (.002) -0.1 (.004)
B
0 -0.2 (.008)
C
0.1 (.004)
mm (inch) D
0 -0.25 (.01)
PITCH
2.74 (.1078) 2.74 (.1078) 2.76 (.1086)
F
10.97 (.432) 19.2 (.756) 33.12 (1.304)
4 (.157)
K
16.3 (.642) 24.6 (.968) 38.3 (1.508)
31.15 (1.226) 39.4 (1.551) 53.3 (2.098)
16.4 (.645) 24.8 (.976) 38.5 (1.515)
25 (.984) 33.3 (1.311) 47 (1.850)
8.03 (.316) 8.03 (.316) 8.03 (.316)
www..com www..com
Panel mounting options GROUNDING TABS :
V1 grounding tab
V2 grounding tab
BOARDLOCKS :
3.4 (.134)
3.4 (.134)
ZeFo boardlocks
LIF boardlocks
ZeFo operation 1 2
BLOOMING PIN
PCB
PCB
FLANGES ACCESSORIES :
M3 or #4-40 rear insert
6.4
+0.2 0
(.252 +.008 ) 0
o3.8 (.150)
5.85 (.230)
installed #4-40 screwlock
fixed #4-40 screwlock
Fixed Front Female
Threaded Rear
Installed Front Female
1/2
5
6
SM2
TECHNICAL DATAS
www..com www..com
HOW TO ORDER
How to order
17 SM2
.....
S
.....
.....
.....
.....
configuration : 09 15 25
packaging : R = reel T = tube
board locks / grounding tab: 1 = V1 grounding tab +ZeFo boardlocks (PCB = 1.6) 4 = ZeFo boardlocks only (PCB = 1.6) 7 = V1 grounding tab only 8 = no grounding tab and no boardlocks B = V2 grounding tab + LIF boardlocks (PCB = 1.6)
contact plating : 1 = 0.2m Au ( 7.9") 2 = 0.4m Au (15.7") 3 = 0.5m Au (19.7") 4 = 0.8m Au (31.5") 6 = 1.27m Au (50")
mounting options : 1 = rear insert 4-40 2 = rear insert M3 5 = installed front screwlock 4-40 6 = fixed front screwlock 4-40
: Standard options
For special request, please consult factory
Memo
Do not hesitate to contact us for further information BP 349 39105 Dole Cedex - France
Fax : 33 (0) 3 84 82 94 11
Technical support
Tel. : 33 (0) 3 84 82 94 00
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. E230/A
MEDIASQUARE (33) 01 46 31 36 36
www..com www..com
TF
D-Sub connectors - Stamped and Formed Contacts
PRESS FIT STRAIGHT PCB TERMINATION
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Materials and platings Shells Insulator Pin contact Steel, tin plated Glass-filled thermoplastic, UL 94V-0 Brass, selected gold in mating area ; 2.54m (100 inches) min. tin-lead on termination area over ; 1.27m (50 inches) min. nickel Phosphor bronze, selected gold in mating area ; 2.54m (100) min. tin-lead on termination area over ; 1.27m(50) min. nickel Brass, 2.54m (100 inches) min. nickel plated Brass, 2.54m (100 inches) min. nickel plated Brass, 2.54m (100 inches) min. nickel plated (removable)
The Amphenol "TF" series features eye of needle formed contacts, and insulator with closed entry contacts cavities. This series gives you Amphenol's high standards of quality and reliability to meet all your technical requirements.
Socket contact
Rear insert Boardlock Screwlock
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 300V AC 1000V AC / rms 60Hz for one minute 1000M 20m max
Solderless straight PCB mount connectors
Climatic Data Operating temperature Salt spray -55C to +125C 24 hours
* Industrial * Telecom * Any backplanes
connections
Mechanical Data Single contact insertion force Single contact withdrawal force Single contact insertion on board Single contact withdrawal from board Standard plating thickness 3.60 N 0.2 N 100 N 20 N Gold flash 0.4m (15 inches) gold 0.76m (30 inches) gold
Terminal Specification Finished Hole Cu Sn 1 (+0.09 -0.06) > 25 m < 15 m
Boardlock Specification 3.1 +/- 0.05 m Min 25 m 5-15 m
E4/A
TF / E4
www..com www..com
OVERALL DIMENSIONS
Socket version
Plug version
For PCB holes diameters, see on page 1 (finished holes)
DIMENSIONS mm (inch) B C socket
24.99 (0.984) 33.32 (1.312) 47.04 (1.852) 63.50 (2.5) 16.92 (0.666) 25.50 (1.004) 38.96 (1.534) 55.42 (2.182)
Nb OF CONTACTS 9 15 25 37
A
C plug
16.33 (0.643) 24.66 (0.97) 38.38 (1.511) 54.84 (2.16)
30.81 (1.185) 39.14 (1.54) 53.04 (2.088) 69.32 (2.729)
www..com www..com
Female
Size of connectors 9 15 25 37
Tooling PN 981 MC 982 MC 983 MC 984 MC
Male
Size of connectors 9 15 25 37
Tooling PN 985 MC 986 MC 987 MC 988 MC
TF / E4
PRESS-FIT TOOLING
www..com www..com
HOW TO ORDER
Board mounting option
Option 0 Option 1
Flange mounting option
Option 1 or 4
Option 2 or 5
How to order
17TF .... .... .... .... .... ....
Series Flange mounting option : 1 = #4-40 threated hole 2 = #4-40 threated hole with #4-40 UNC screwlock installed 4 = M3 threated hole 5 = M3 threated hole with M3 scewlock instaled
Number of contacts : 09-15-25-37
Contact type: 1 = pin 0 = socket
Board mounting option 0 = without boardlock 1 = with boardlock
Contact plating 0 = gold flash 1 = 0.4 mm (15 inches) 2 = 0.76 m (30 inches)
Front shell plating 1 = tin over nickel
Do not hesitate to contact us for further information
Amphenol
Amphenol Socapex
Telecom Business Unit 21, chemin du Defois - BP 349 F - 39100 Dole Fax: +33 (0) 3 84 82 94 11
http://www.dsubconnector.com
Technical support Tel.: +33 (0) 3 84 82 94 00
E4/A
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
Mediasquare +33 (0) 1 46 31 36 36
www..com www..com
D-ST
Screw Termination D'Sub series
CHARACTERISTICS DESCRIPTION APPLICATIONS
Materials and platings Shells Insulator Contacts Steel Tin plated Glass filled thermoplastic, UL94V-0 Machined brass, full gold
The Amphenol Screw Termination D'Sub series is especialy designed for field applications. These new connectors permit easy wiring without any specific tool : Just a standard electrician's screwdriver is required. Due to their reduced overall dimensions, these connectors are compatible with all standard hoods and accessories
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 7,5 A max 300 V RMS at 50 Hz 1000 V RMS at 50 Hz > 5000 M at 500 V DC < 5 m
Climatic Data Operating temperature Damp heat Salt spray - 55c to + 85c, peack at 125c 21 days ( 40c - 95% HR ) 48 hours
Mechanical Data Cable type Cable gage Screw torque Mating cycles Solid or stranded 0,75 mm2 max ( AWG 18 ) - For bigger wire, please consult factory 0,05 mN max 100 (classe II) or 500 (classe I)
Simplify your cable assemblies !
* Industry
control of speed variators, calculators...
* Houses and public buildings
control of heating, air conditionning, lighting, shutters, fire safety... fluids control, motorway tolls, street lighting...
E210/A
D-ST
* Infrastructures
www..com www..com
OVERALL DIMENSIONS
Cable stripping
A SIZE
9 15 25 37
B
C
D
E
+0,25 ( ,010" ) 0 -0,25 ( ,010" ) -0,2 ( ,008" ) 30.7 ( 1.209" ) 39 ( 1.535" ) 52.9 ( 2.083" ) 69.2 ( 2.724" ) 16.4 ( .646" ) 24.8 ( .976" ) 38.5 ( 1.516" ) 54.9 ( 2.161" )
+0,2 ( ,008" ) +0,1 ( ,004" ) +0,1 ( ,004" ) 0 -0,1 ( ,004" ) -0,4 ( ,016" ) 16.8 ( .661" ) 25.1 ( .988" ) 38.8 ( 1.528" ) 55.3 ( 2.177" ) 25 ( .984" ) 33.3 ( 1.311" ) 47 ( 1.850" ) 63.5 ( 2.500" ) 19.4 ( .370" ) 27.7 ( 1.091" ) 41.4 ( 1.630" ) 57.9 ( 2.280" )
www..com www..com
How to order
717D E09
Classe II: Classe I: 77D 717D 177D 777D Female connector Male connector, shells with dimples Female connector Male connector, shells with dimples E09, A15, B25, C37 P = Male S = Female
P
ST
1
Size and number of contacts Type of contact: Contact termination: Kit connector + hood option: (See following description)
ST = Screw termination 1 = DPPK 2 = DSSK 3 = DTZK 4 = DVZK hood hood hood hood
Plastic hoods
DPPK Straight cable entry
DSSK Angled cable entry
Metallic hoods
DTZK Straight cable entry
DVZK Angled cable entry
D-ST
HOW TO ORDER
www..com www..com
DFR
D-Sub connectors - Stamped and Formed Contacts
FLAT RIBBON D-SUB CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Specifications
* UL File: E149426 * Connectors according to MIL C24308 Materials and Platings Shells Insulator Pin contact Steel with nickel plating Glass-filled thermoplastic, UL 94V-0 Brass, selected gold in mating area; 2.54m (100") min. tin lead on termination area over 1.27m (50") min. nickel Phosphor bronze, selected gold in mating area; 2.54m (100") min. tin lead on termination area over 1.27m (50") min. nickel Brass, 2.54m (100") min. nickel plated Brass, 2.54m (100") min. nickel plated
These connectors are suitable for compact requirement of modern peripheral equipement. Special contact design allows usage of standard 1.27mm (.05") flat cable. Suitable with all standard D-Sub hoods.
Socket contact
Rear insert Screwlock
Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 5A 250V AC/rms 60Hz 1000V AC/rms 60Hz for one minute 1000M 20m max
Simplify your cable assemblies !
Climatic Data Operating temperature -40C to +125C
* Industrial * Telecom * Any industry standard
I / O connections
Mechanical Data Single contact insertion force Single contact withdrawal force Mating and unmating force Unit: kg (lb)
No. of Cts 9 (size E) 15 (size A) 25 (size B) 37 (size C) Mate (max) 3.05 5.09 8.44 12.51 (6.74) (11.24) (18.66) (27.65) Unmate (min) 0.36 0.46 0.81 1.1 (0.79) (1.01) (1.8) (2.47)
0.54kg (1.19lb) max 0.06kg (0.13lb) min
Standard plating thicknesses
* gold flash * 0.4m (15") gold * 0.76m (30") gold
E272/B
DFR
www..com www..com
OVERALL DIMENSIONS
Shell size dimensions
A0.38 (.015) 8.380.13 (.33.005) 7.90.13 (.311.005) 6.1 (.240) 17.68 (.696) B0.13 (.005) C0.13 (.005) D0.13 (.005) 2.84 (.112) E0.05 (.002) POSITION #1 12.550.38 (.494.015)
10 2.77 (.109)
17.48 (.688)
5.9 (.232)
Nb OF CONTACTS 9 15 25 37
A
30.84 (1.21) 39.24 (1.54) 53.04 (2.09) 69.32 (2.73)
DIMENSIONS mm (inch) B C
24.99 (.984) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50) 16.92 (.666) 24.70 (.972) 38.96 (1.53) 55.42 (2.18)
D
16.24 (.639) 24.56 (.967) 38.38 (1.51) 54.76 (2.16)
E
11.09 (.437) 19.39 (.763) 33.24 (1.31) 49.86 (1.96)
STRAIN RELIEF
7.8 (.307)
4.7 (.185)
www..com www..com
Panel mounting option
M3 or #4-40
o3.05 (.120")
Standard rivet o 3.05mm no digit
Threaded rear insert B/D
M3 or #4-40 screwlock
Front female screwlock A/C
Tool
5 (.197")
3.4 (.134")
Support for hand termination tool: 974MC
DFR
TECHNICAL DATAS
www..com www..com
NOTES
How to order
...
...
FR
...
...
...
...
C309
flash gold
17D:
tinned shell for plug and receptacle
0.4m (15")
117D: tinned shell for plug and receptacle
shell size: E,A,B,C
contact type: P = pin S = socket
Flat ribbon cable type configuration : 09, 15, 25, 37
mounting options : no digit = standard rivet o 3.05mm A = front screwlock M3 C = front screwlock 4-40 B = rear insert M3 D = rear insert 4-40
type : A = front metal shell B = all plastic
: Standard options
For special request, please consult factory
Do not hesitate to contact us for further information
Amphenol
Amphenol Socapex
Telecom Business Unit 21, chemin du Defois - BP 349 F - 39100 Dole Fax: +33 (0) 3 84 82 94 11
http://www.dsubconnector.com
Technical support Tel.: +33 (0) 3 84 82 94 00
E272/B
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
Mediasquare +33 (0) 1 46 31 36 36
Plating option : valid only for 0.76m (30") part number must be written as follow: 17D...............C309 or 117D..............C309
www..com www..com
MP
D-Sub connectors - Stamped and Formed Contacts
IDC DISCRETE WIRE CONNECTORS
MAIN CHARACTERISTICS
DESCRIPTION APPLICATIONS
Materials and platings Shells Contacts Plating Wire types Steel with bright tin over zinc shell plating Phosphor bronze Contact area: gold over nickel IDC area: tin over nickel Solid and stranded wires AWG 24-28
Amphenol IDC discrete D-subs offer low-profile design that accommodates many of the compact requirements of computer interfacing, instrumentation and business equipment. Fast, four-point solderless termination ensures reliable connections. This series is available in 9, 15, 25, 37 contact configurations. Contacts, including stain relief, are easily removable in case of repair.
Electrical data Current rating Voltage rating Dielectric 5 A Max. per contact 500 V AC at sea level 150 V AC at 90.000 feet Thermoplastic Polyesther UL 94 VO rated
Simplify your cable assemblies
Climatic Data Operating temperature Salt spray -55C to +125C 24 hours
Mechanical Data Mating and unmating force Size E 30 N Max. 3.5 N Mini. Size A 50 N Max. 4.5 N Mini. Size B 83 N Max. 8.0 N Mini. Size C 123 N Max. 11.0 N Mini.
* * * *
Industrial Telecom Any industry standard I/O connections
Standart plating thicknesses Gold flash 0.4m (15) gold 0.76m (30) gold
E25/A
IDC / E25
www..com www..com
OVERALL DIMENSIONS
Socket version
Nb OF CONTACTS
DIMENSIONS mm (inch) A
30.81 (1.21) 39.14 (1.54) 53.04 (2.09) 69.32 (2.73)
B
16.24 (0.64) 24.56 (0.97) 38.38 (1.51) 54.76 (2.16)
C
24.99 (0.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50)
D
14.90 (0.59) 23.00 (0.91) 36.90 (1.45) 59.30 (2.33)
9
15
25
37
www..com www..com
Plug version
Nb OF CONTACTS
DIMENSIONS mm (inch) A
30.81 (1.21) 39.14 (1.54) 53.04 (2.09) 69.32 (2.73)
B
16.92 (0.67) 25.25 (0.99) 38.96 (1.53) 55.42 (2.18)
C
24.99 (0.98) 33.32 (1.31) 47.04 (1.85) 63.50 (2.50)
D
14.90
9
15
23.00 (0.91) 36.90 (1.45) 59.30 (2.33)
25
37
IDC / E25
(0.59)
OVERALL DIMENSIONS
www..com www..com
HOW TO ORDER
Tooling for IDC connectors
Terminating frame Ref: 21046 Terminating head Ref: 976 MC
Connector holders references Number of Contacts 09 15 25 37 Hand tool Hand tool Male Female
Mediasquare +33 (0) 1 46 31 36 36
991 MC 993 MC 995 MC 997 MC
992 MC 994 MC 996 MC 998 MC Wiring with step by step movements + wire cutting Repairing single insertion tool
Ref: 980 MC Ref: 989 MC
How to order
17MP .... .... .... .... .... ....
IDC Series OPTION
Number of position 09 = 9 positions 15 = 15 positions 25 = 25 positions 37 = 37 positions Contact type 0 = Receptacle 1 = Plug Contact plating Selective gold plating 0 = Gold flash 1 = 0.4 m. Gold (15'') 2 = 0.8 m. Gold (30'')
Flange mounting option 0 = Clear hole O 3.1 1 = Rear insert # 4-40 2 = Rear insert # M3 3 = Front Screw #4-40 4 = Front Screw M3
Front shell plating 1 = Tinned (plugs with dimples)
Do not hesitate to contact us for further information
Amphenol
Amphenol Socapex
Telecom Business Unit 21, chemin du Defois - BP 349 F - 39100 Dole Fax: +33 (0) 3 84 82 94 11
http://www.dsubconnector.com
Technical support Tel.: +33 (0) 3 84 82 94 00
E25/A
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
www..com www..com
D'Sub Metallic Hoods
DTZK & DVZK series
MAIN CHARACTERISTICS
* Material and plating:
Zinc die-cast, nickel plated
DESCRIPTION
* Cable strainrelief:
Steel fiber reinforced Polycarbonate UL94V-0
The new Amphenol metallic hoods series for D'Sub connectors offers protection from magnetic and radio interferencies to cable assemblies. Easily assembled these hoods are suitable for all industrial and telecom applications.
* Temperature range:
-55c to 125c
* Cable diameter:
4 to 13 mm
* Attenuation factor:
> 40 dB between 30 MHz and 1 GHz
* Approvals:
VDE 0871 - FCC 20780 - 89 / 336 / EU
Shield your cable assemblies !
APPLICATIONS
* * * *
Industrial Military Telecom Any application requiring EMI/RFI protection
E220/A
D'SUB ACCESSORIES
OVERALL DIMENSIONS
www..com www..com
DTZK Series
( 1.866" )
47,4
15 ( .591" )
A
Part number 17D TZK 9K 17D TZK 15K 17D TZK 25K 17D TZK 37K
A 21 ( .827" ) 39,5 ( 1.555 ) 54,4 ( 2.144" ) 70,9 ( 2.791" )
B 38,3 ( 1.508" 40,5 ( 1.594" 47,3 ( 1.862" 52,2 ( 2.055" ) ) ) )
DVZK Series
( 1.173" )
14,5 ( .571" )
A
Part number 17D VZK 9K 17D VZK 15K 17D VZK 25K 17D VZK 37K
A 31 ( 1.220" ) 39,5 ( 1.555" ) 53,2 ( 2.094" ) 69,7 ( 2.744" )
B 36,2 ( 1.425" 40,2 ( 1.583" 40,2 ( 1.583" 40,2 ( 1.583" ) ) ) ) Size 9 equiped with only one screw
29,8
B
B
Assembly Instructions DTZK Series
Type 17D TZK 9K 17D TZK 15K 17D TZK 25K 17D TZK 37K
A 30 ( 1.181" ) 40 ( 1.575" )
1.
A 12 - 20 mm ( .472 - .787" )
2.
3.
4.
D'SUB ACCESSORIES
TECHNICAL DATA
www..com www..com
TECHNICAL DATA
www..com www..com
Assembly Instructions DVZK Series
1.
12 - 20 mm ( .472 - .787" )
A
2.
3.
4.
Type 17D VZK 9K 17D VZK 15K 17D VZK 25K 17D VZK 37K
A 30 ( 1.181" ) 45 ( 1.772" )
Do not hesitate to contact us for further information Immeuble le Doublon - 11, avenue Dubonnet 92407 Courbevoie Cedex
Tel. : 33 (0) 1 49 05 30 00 - Fax : 33 (0) 1 49 05 30 44
Technical support
Tel. : 33 (0) 3 84 82 94 00
The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. E220/A
MEDIASQUARE (33) 01 46 31 36 36
SELECTION CHART
Contact terminations
tem per atu re
D-SUB RANGE
res ista nce
Series
17D 17DF 17DF-E 17DM 17DMM 17DMW 17RR 17DTK
Ins erts UL 94V O
HE5 - MIL
NFC93425 - UL
100 to 200 500 500 500 500 500 100 to 500 100 to 500 100 to 500 100 to 500 100 to 200 100 to 500
Brass Brass Bronze Bronze Brass Bronze Brass Bronze Brass Bronze Brass Brass Brass Bronze Brass Brass Brass Bronze Brass Brass Brass Brass Brass
Black thermoplastic Black thermoplastic Black thermoplastic Green DAP Green DAP Green DAP Black thermoplastic Black thermoplastic Black thermoplastic Black thermoplastic Black thermoplastic Black thermoplastic Black thermoplastic Black thermoplastic
High temperature black thermoplastic SMT compatible High temperature black thermoplastic SMT compatible High temperature black thermoplastic SMT compatible High temperature black thermoplastic SMT compatible
-55C + 85C 125C peaks
300 V RMS under 50 Hz
1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 750 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz 700 V RMS under 50 Hz 300 V RMS under 50 Hz 780 V RMS under 50 Hz with cable 1000 V RMS under 50 Hz 700 V RMS under 50 Hz 1000 V RMS under 50 Hz 1000 V RMS under 50 Hz
7.5 A 7.5 A
Ask for derating curves
> 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 5000 M > 1000 M with cable > 5000 M > 5000 M > 5000 M > 5000 M
< 8,5 m < 5 m < 1 m < 5 m < 5 m < 5 m < 10 m < 8,5 m < 10 m < 10 m < 10 m < 15 m < 10 m < 10 m < 10 m < 15 m < 10 m < 10 m
HE501 - MIL NFC93425 - UL Lnz - GAMT1A HE501 HE508 MIL C 24308 NFC93425 - UL Lnz - GAMT1A NFC93425 - UL GAMT1A QPL
-55C + 125C 300 V RMS under 50 Hz -55C + 85C 125C peaks 300 V RMS under 50 Hz
-55C + 155C 300 V RMS under 50 Hz -55C + 155C 300 V RMS under 50 Hz -55C + 155C 300 V RMS under 50 Hz -55C + 85C 125C peaks 500 V RMS under 50 Hz
7.5 A 7.5 A 7.5 A 40 A 7.5 A 7.5 A 5A 5A 5A 5A 5A 1A with cable 7.5 A 5A 7.5 A 40 A 5A
HE507 - MIL NFC93425 - UL GAMT1A HE5 HE5 NFC93425 - UL NFC93425 - UL NFC93425 - UL NFC93425 - UL UL UL
-55C + 105C 300 V RMS 125C peaks under 50 Hz -55C + 125C 300 V RMS under 50 Hz -55C + 85C 125C peaks -55C + 85C -55C + 85C -40C + 85C 300 V RMS under 50 Hz 300 V RMS under 50 Hz 300 V RMS under 50 Hz 100 V
17DFMP HE501 17SD 17TS 17HD 17FCC 17DFR 17HT-N
www..com www..com
HE5 - MIL HE5 - MIL HE5
HE501 - MIL UL - vibration MIL 100 to 500 STD 1344 - FCC20780 HE5 MIL GAMT1C - CSA UL UL MIL - UL HE507 - MIL UL - CSA NFC93425 HE5 - MIL UL - CSA NFC93425 100 to 500 100 to 500 100 to 500 100 to 500 100 to 500
-25C + 105C 125 V RMS max. cable under 50 Hz -55C + 105C 300 V RMS 125C peaks under 50 Hz -55C + 105C 300 V RMS 125C peaks under 50 Hz -55C + 105C 300 V RMS 180C peaks under 50 Hz -55C + 105C 300 V RMS 125C peaks under 50 Hz
17HT-H 17TW 17SM
Con tac t re sis tan ce
Die lec tric vol tag e
Thr oug hh ole s W. wra pp. IDC
Vol tag e ra ting
Ma ting cyc les
Cur ren t ra ting
App rov als
Ins ula tion
SM T
Op era ting
Sta nda rd
Cri mp
Con tac ts
Sol der

▲Up To Search▲

Price & Availability of 77HDA26S

	To Download 77HDA26S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .